Battery BLPB75 6000 mAh by Realme 14 Pro 5G RMX5055 Premium quality

BLPB75 6000mAh Battery for Realme 14 Pro 5G RMX5055 Premium Quality

BLPB75 battery for Realme 14 Pro 5G RMX5055 in Premium quality, designed to recover the autonomy and power stability of the device. This replacement part has a typical capacity of 6000mAh, a minimum capacity of 5860mAh, a nominal voltage of 3.92V and an energy rating of 23.52Wh. Its format, flex cable and connector position are prepared to replace a deteriorated, swollen battery or one with a significant reduction in operating time, maintaining stable power delivery during daily use.

Specifications

Internal rechargeable lithium-ion polymer battery.

Typical capacity of 6000mAh.

Minimum capacity of 5860mAh.

Nominal voltage of 3.92V.

Energy rating of 23.52Wh.

BLPB75 internal reference.

Confirmed compatibility with Realme 14 Pro 5G RMX5055.

Prepared to work with the 45W SUPERVOOC charging system when the charger, cable, connector and charging circuit are in good condition.

Premium quality provides stable current delivery and uniform operation during charging and discharging cycles. It helps correct unexpected shutdowns, restarts, rapid percentage drops, irregular charging and insufficient autonomy caused by wear of the installed battery. Its construction facilitates precise fitting inside the chassis and a firm connection to the mainboard. It is intended for professional repairs aimed at recovering the power performance of the handset, reducing repeat failures and optimising repair times.

Available for immediate shipping from Spain.

Installation Advice

Turn off the device completely before starting the repair.

Disconnect the installed battery before handling other internal components.

Use suitable tools and protection against electrostatic discharge.

Do not bend, puncture, press or apply direct heat to the battery.

Check the BLPB75 reference, polarity, flex cable shape and connector position.

Replace the fixing adhesives to prevent movement inside the chassis.

Perform a power-on and charging test before final closure.

Complete a charging cycle and check that the percentage and temperature remain stable.

Notice

Before installation, always check the battery fitted in the handset. Some Realme models may have regional variants or different internal references depending on the market in which they were sold. Always compare the BLPB75 reference printed on the removed battery, the technical model of the device, the flex cable shape, the connector position, the voltage and the physical dimensions before installation.

Direct confirmed compatibility corresponds to the Realme 14 Pro 5G RMX5055. On RMX5056 units, it must first be checked that the installed battery has the BLPB75 reference.

Technical Table