Battery BLPC61 6000mAh by Oppo Reno14 F 5G Reno14 FS 5G CPH2743 premium quality

The BLPC61 6000 mAh battery for Oppo Reno14 F 5G and Oppo Reno14 FS 5G, both with technical model CPH2743, is a replacement designed to replace a deteriorated internal battery. It is also compatible with the Oppo Reno14 F Dark Side Limited Edition, which belongs to the same platform. It uses lithium-ion technology and a nominal voltage of 3.92 V. It allows the repair of devices experiencing reduced battery life, irregular discharge or shutdowns associated with battery wear. Its identification through the BLPC61 reference simplifies component selection for professional repairs and maintenance work.

• Component type: Internal rechargeable battery for smartphones.

• Battery reference: BLPC61.

• Typical capacity: 6000 mAh.

• Nominal voltage: 3.92 V.

• Technology: Lithium-ion (Li-ion).

• Compatible models: Oppo Reno14 F 5G, Oppo Reno14 FS 5G and Oppo Reno14 F Dark Side Limited Edition.

• Technical model: CPH2743.

• Function: Energy storage and power supply for device operation.

The BLPC61 battery allows a degraded unit to be replaced when capacity loss affects the everyday operation of the Oppo Reno14 F 5G or Reno14 FS 5G. Its 6000 mAh capacity and nominal voltage of 3.92 V make it easier to select a replacement with the electrical characteristics corresponding to this reference.

The BLPC61 identification allows professionals to distinguish this component from other batteries used in the Oppo Reno family. Its compatibility with the CPH2743 variants, including the Dark Side Limited Edition, expands its applications in repairs and refurbishment work. It is a practical solution for restoring battery life when the problem originates from battery wear, while retaining the remaining functional components of the device.

• Completely power off the device, disconnect the battery and use electrostatic discharge (ESD) protection.

• Carefully remove the rear cover and extract the deteriorated battery using appropriate disassembly tools.

• Clean away the remaining adhesive residue and properly prepare the battery compartment.

• Check the BLPC61 reference and align the power connector without forcing the contacts or flex cable.

• Install the battery using suitable mounting adhesives and ensuring correct positioning.

• Check device startup, battery recognition and charging system operation before final closure.

• Perform a charging test and check the stability of the battery percentage during operation.

• Renew the closure adhesives and check correct assembly and sealing of the rear cover.