Battery BLPC71 6000mAh by Realme C71 4G RMX5303 Realme P3 Lite 4G RMX5300 premium quality

The BLPC71 6000 mAh battery, premium quality, is an internal replacement for Realme C71 4G RMX5303, Realme P3 Lite 4G RMX5300 and the 6000 mAh versions of Realme Note 70T, Note 70 and Note 70s RMX5313 equipped with this reference. It features lithium-ion technology, a rated capacity of 5830 mAh and a voltage of 3.88 V. It is designed to replace deteriorated batteries showing reduced battery life, unexpected shutdowns or power supply problems. Its BLPC71 identification facilitates component selection for professional repairs and maintenance work.

- Compatible brand:Realme.

- Compatible models:Realme C71 4G, Realme P3 Lite 4G, Realme Note 70T, Realme Note 70 and Realme Note 70s, in versions equipped with a 6000 mAh BLPC71 battery.

- Compatible technical models:RMX5303, RMX5300 and RMX5313, depending on version.

- Battery reference:BLPC71.

- Quality:Premium.

- Component type:rechargeable internal battery.

- Technology:lithium-ion (Li-ion).

- Typical capacity:6000 mAh.

- Rated capacity:5830 mAh.

- Nominal voltage:3.88 V.

- Charge limit voltage:4.48 V.

- Typical energy:23.28 Wh.

- Rated energy:22.63 Wh.

- Connection system:internal connection to the phone's power supply circuit.

- Installation:internal mounting in the device's battery compartment.

The premium quality BLPC71 battery offers a replacement solution to restore battery life in compatible Realme devices when the installed battery shows wear. Its typical capacity of 6000 mAh and nominal voltage of 3.88 V correspond to the electrical parameters identified for this reference, facilitating the selection of the appropriate replacement. Lithium-ion technology allows energy to be stored to power the phone during normal operation. Its internal design is intended for the battery compartment of compatible models, allowing a localized repair while retaining the other functional components. It is a practical alternative for professional repair workshops that need to work on phones with capacity loss, charging difficulties or problems related to battery deterioration.

- Completely turn off the device and use antistatic protection during the repair.

- Carefully remove the rear cover using suitable disassembly tools.

- Disconnect the battery from the motherboard before continuing with removal.

- Remove the installed battery using the corresponding removal points, avoiding deformation of the cell or damage to nearby components.

- Clean the battery compartment and remove previous adhesive residue.

- Apply suitable new fixing adhesives and correctly position the BLPC71 battery.

- Align the connector and establish the connection without forcing the flex cable or contacts.

- Check power-on, battery recognition and charging operation before final closure.

- Check the progression of the battery percentage during the first charging and usage cycles.

- Renew the rear cover adhesive and close the device by applying even pressure to achieve a proper fit.