Battery BM5S 5000mAh by Xiaomi 13T Pro 23078PND5G 1330103000035B Service Pack

The BM5S battery for Xiaomi 13T Pro 23078PND5G and 23088PND5R is an original Service Pack replacement, identified by part number 1330103000035B. It is also compatible with the Xiaomi Redmi K60 Ultra 23078RKD5C, which uses the same BM5S battery model. With a typical capacity of 5000 mAh and a nominal voltage of 3.88 V, it allows the replacement of deteriorated batteries experiencing reduced battery life, rapid discharge or unexpected shutdowns. It is intended for professional repairs that require maintaining the electrical specifications, connections and format of the factory-installed component.

- Brand:Xiaomi.

- Battery model:BM5S.

- Part number (Part No):1330103000035B.

- Typical capacity:5000 mAh.

- Rated capacity:4880 mAh.

- Nominal voltage:3.88 V.

- Typical energy:19.4 Wh.

- Charging voltage limit:4.47 V.

- Technology:rechargeable lithium-ion polymer battery (Li-ion Polymer).

- Component type:internal battery with integrated connections.

- Compatible models:Xiaomi 13T Pro 23078PND5G, 23088PND5R and Xiaomi Redmi K60 Ultra 23078RKD5C.

- Quality:original Xiaomi Service Pack.

The Xiaomi BM5S Service Pack battery retains the format, connections and electrical characteristics corresponding to the factory-installed component, facilitating its integration into compatible devices. Its typical capacity of 5000 mAh helps restore battery life when the previous battery has lost capacity due to wear and accumulated charging cycles.

The official part number 1330103000035B provides precise identification for spare parts management and professional repairs. Its lithium-ion polymer technology offers rechargeable energy storage within the space designed for the internal battery.

For repair technicians, this replacement allows battery replacements using an original manufacturer component, maintaining the device's power supply specifications and facilitating charging and operation checks after installation.

- Switch off the device and disconnect the battery before handling other internal components, using electrostatic discharge (ESD) protection.

- Remove the previous battery using appropriate tools and clean adhesive residue from the battery compartment.

- Position the BM5S battery correctly, aligning its connections without forcing the contacts or flex cables.

- Check power-on, battery recognition and charging operation before closing the device.

- Use appropriate fixing adhesives and check that the battery is correctly seated and the rear cover is properly sealed.

- After installation, perform a normal charging cycle and check the battery percentage progression to verify its reading and calibration.