Battery BM5S 5000mAh by Xiaomi 13T Pro premium quality

The BM5S 5000 mAh battery for Xiaomi 13T Pro 23078PND5G and 23088PND5R is a Premium-quality replacement designed to replace the internal battery when its capacity decreases through use. This battery model is also compatible with the Xiaomi Redmi K60 Ultra 23078RKD5C. Its lithium-ion polymer technology and nominal voltage of 3.88 V correspond to the specifications of the BM5S reference. It is suitable for repairing devices with reduced battery life, rapid discharge or shutdowns associated with battery wear, as well as for maintenance work in specialised repair workshops.

• Component type: Internal replacement battery for smartphones.

• Battery reference: BM5S.

• Typical capacity: 5000 mAh.

• Nominal voltage: 3.88 V.

• Typical energy: 19.4 Wh.

• Technology: Lithium-ion polymer (Li-Po).

• Compatible models: Xiaomi 13T Pro and Xiaomi Redmi K60 Ultra.

• Xiaomi 13T Pro technical models: 23078PND5G and 23088PND5R.

• Redmi K60 Ultra technical model: 23078RKD5C.

• Quality: Premium.

The BM5S Premium battery allows a degraded unit to be replaced without changing other device components when the problem originates in the battery. Its 5000 mAh capacity provides a specific reference for restoring battery life and performing the usual charging and discharging checks after replacement.

The BM5S identification simplifies replacement selection for the compatible Xiaomi 13T Pro and Redmi K60 Ultra variants, avoiding confusion with batteries used in other models within the range. For repair professionals, it is a practical solution for maintenance and refurbishment work, allowing the device to remain in service by replacing a component subject to normal wear.

• Completely power off the device, disconnect the battery and use electrostatic discharge (ESD) protection.

• Carefully remove the deteriorated battery using suitable tools and clean adhesive residue from the battery compartment.

• Check the BM5S reference and correctly align the power connector without forcing the contacts or flex cable.

• Position the battery in its compartment using appropriate mounting adhesives and ensuring correct placement.

• Check device startup, battery recognition and charging system operation before permanently closing the device.

• Perform a normal charging cycle and check the progression of the battery percentage and its behaviour during use.

• Renew the closure adhesives and check correct assembly and sealing of the rear cover.