Battery BM80 8850mAh premium quality

The BM80 8850 mAh premium quality battery is an internal replacement part designed for repairing Xiaomi tablets. Its possible compatibilities include the Xiaomi Pad 7 Pro, in its global and European 24091RPADG and Chinese 24091RPADC versions. It uses lithium-ion polymer technology, with a dual-cell configuration, a typical capacity of 8850 mAh, a rated capacity of 8650 mAh and a nominal voltage of 3.89 V. It is designed to replace deteriorated batteries experiencing reduced battery life, rapid discharge, difficulty maintaining a charge or unexpected shutdowns, facilitating professional repairs.

- Compatible brand: Xiaomi.

- Battery reference: BM80.

- Possible compatibilities: Xiaomi Pad 7 Pro, global, European and Chinese versions.

- Xiaomi Pad 7 Pro Global / European: 24091RPADG.

- Xiaomi Pad 7 Pro China: 24091RPADC.

- Typical capacity: 8850 mAh.

- Rated capacity: 8650 mAh.

- Nominal voltage: 3.89 V.

- Nominal energy: 33.65 Wh.

- Technology: Lithium-ion polymer (Li-Po).

- Configuration: Dual-cell.

- Component type: Internal rechargeable tablet battery.

- Quality: Premium.

The premium quality BM80 battery provides a replacement solution for Xiaomi tablets experiencing wear or reduced performance in their internal battery. Its typical capacity of 8850 mAh makes it possible to replace the deteriorated component and help restore the device's battery life, reducing problems related to rapid discharge and unexpected shutdowns.

Its lithium-ion polymer technology and dual-cell configuration correspond to the characteristics documented for the Xiaomi Pad 7 Pro. The BM80 reference is associated with the global and Chinese variants of this tablet, making it easier to identify in specialized catalogs.

Identification through the BM80 code allows the replacement part to be compared with the previously installed battery. It is a practical alternative for professional repair services seeking to extend the tablet's useful life through a functional repair.

- Completely power off the tablet and disconnect the battery before handling internal components, using ESD protection.

- Carefully remove the screen and the necessary access components following the disassembly procedure corresponding to the device.

- Compare the BM80 reference, dimensions, connector positions and flex cables with those of the removed battery.

- Disconnect the battery connectors and carefully remove the mounting adhesives used during installation.

- Clean any adhesive residue and properly prepare the battery compartment before installing the new replacement.

- Position the battery correctly, renew the mounting adhesives and connect the flex cables without applying excessive pressure.

- Check tablet startup, battery detection and charging system operation before final closure.

- Perform a full charge and subsequently check the battery percentage progression during normal use.

- Replace the closing adhesives and ensure the removed components are evenly secured.