Battery BM81 8850mAh premium quality

The BM81 8850 mAh premium quality battery is an internal replacement part designed for repairing Xiaomi and POCO tablets. Its possible compatibilities include the Xiaomi Pad 7 2410CRP4CG, 2410CRP4CC and 2410CRP4CI, as well as the POCO Pad X1 25099RP08G. It uses lithium-ion technology, with a dual-cell configuration, a typical capacity of 8850 mAh, a rated capacity of 8650 mAh and a nominal voltage of 3.89 V. It is designed to replace deteriorated batteries experiencing reduced battery life, rapid discharge, difficulty maintaining a charge or unexpected shutdowns, facilitating professional repairs.

- Compatible brand: Xiaomi / POCO.

- Battery reference: BM81.

- Possible compatibilities: Xiaomi Pad 7 and Xiaomi POCO Pad X1.

- Xiaomi Pad 7 Global / European: 2410CRP4CG.

- Xiaomi Pad 7 China: 2410CRP4CC.

- Xiaomi Pad 7 India: 2410CRP4CI.

- Xiaomi POCO Pad X1 Global: 25099RP08G.

- Typical capacity: 8850 mAh.

- Rated capacity: 8650 mAh.

- Nominal voltage: 3.89 V.

- Nominal energy: 33.65 Wh.

- Technology: Lithium-ion (Li-ion).

- Configuration: Dual-cell.

- Component type: Internal rechargeable tablet battery.

- Quality: Premium.

The premium quality BM81 battery provides a replacement solution for Xiaomi and POCO tablets experiencing wear or reduced performance in their internal battery. Its typical capacity of 8850 mAh makes it possible to replace the deteriorated component and help restore the device's battery life, reducing problems related to rapid discharge and unexpected shutdowns.

Its lithium-ion technology and dual-cell configuration correspond to the characteristics identified for this reference. Its association with different regional variants of the Xiaomi Pad 7 and the POCO Pad X1 expands its possible applications in professional repairs.

Identification through the BM81 code simplifies replacement selection and comparison with the previously installed battery. It is a practical alternative for repair technicians seeking to extend the tablet's useful life through a functional repair.

- Completely power off the tablet and disconnect the battery before handling internal components, using ESD protection.

- Carefully remove the screen or the necessary access components according to the device's disassembly procedure, using appropriate tools.

- Compare the BM81 reference, dimensions, connector positions and flex cables with those of the removed battery.

- Disconnect the battery connectors and carefully remove the mounting adhesives used during installation.

- Clean any adhesive residue and properly prepare the battery compartment before installing the new replacement.

- Position the battery correctly, renew the mounting adhesives and connect the flex cables without applying excessive pressure.

- Check tablet startup, battery detection and charging system operation before final closure.

- Perform a full charge and subsequently check the battery percentage progression during normal use.

- Replace the closing adhesives and ensure the removed components are evenly secured.