Battery BN5P 4900mAh by Xiaomi Redmi Note 13 4G Redmi Note 13 5G 1330102000116B Service Pack

 The BN5P battery for Xiaomi Redmi Note 13 4G 23129RAA4G and Redmi Note 13 5G 2312DRAABG is an original Service Pack replacement, identified by part number 1330102000116B. It is also compatible with other regional variants of both models. It features a rated capacity of 4900 mAh, a typical capacity of 5000 mAh and a nominal voltage of 3.89 V. It allows the replacement of deteriorated batteries experiencing reduced battery life, rapid discharge or unexpected shutdowns. It is intended for professional repairs that require maintaining the electrical characteristics and format of the factory-installed component.

 - Brand:Xiaomi.

 - Battery model:BN5P.

 - Part number (Part No):1330102000116B.

 - Rated capacity:4900 mAh.

 - Typical capacity:5000 mAh.

 - Nominal voltage:3.89 V.

 - Rated energy:19.07 Wh.

 - Technology:rechargeable lithium-ion polymer battery (Li-ion Polymer).

 - Component type:internal battery with integrated flexible connection.

 - Xiaomi Redmi Note 13 4G:23129RAA4G, 23124RA7EO and 23129RA5FL.

 - Xiaomi Redmi Note 13 5G:2312DRAABG, 2312DRAABI and 2312DRAABC.

 - Quality:original Xiaomi Service Pack.

 The Xiaomi BN5P Service Pack battery helps restore phone battery life when the previous battery has lost capacity due to wear and accumulated charging cycles. Its rated capacity of 4900 mAh and typical capacity of 5000 mAh provide the energy storage characteristics designed for compatible devices.

 As an original Service Pack replacement, it maintains the format, connections and electrical specifications corresponding to the factory-installed component, facilitating its integration into the phone's internal compartment.

 Its compatibility with the 4G and 5G versions of the Redmi Note 13 allows the same part number to be used across different professional repairs. The BN5P identification and part number 1330102000116B simplify component selection and spare parts management in specialized repair services.

 - Switch off the device and disconnect the battery before handling other internal components, using electrostatic discharge (ESD) protection.

 - Carefully remove the previous battery and clean adhesive residue from the battery compartment.

 - Position the BN5P battery correctly, aligning its connector without forcing the contacts or excessively bending the flex cable.

 - Check device power-on, battery recognition and charging operation before final closure.

 - Use appropriate fixing adhesive and check that the battery is correctly seated in its compartment.

 - After installation, perform a normal charging cycle and verify the battery percentage progression to check its reading and calibration.

 - Close the rear cover using suitable adhesive, checking its alignment and the correct sealing of the device.