Battery BN6E 6500mAh by Xiaomi Redmi Note 15 Pro 4G 1330101000284B Service Pack

The BN6E 6500 mAh battery for Xiaomi Redmi Note 15 Pro 4G 25100RA69G, with part number 1330101000284B and Service Pack quality, is a replacement component designed to replace the internal power supply unit of this model. It features lithium-ion technology, a typical capacity of 6500 mAh and a nominal voltage of 3.87 V. It allows phones experiencing reduced battery life, rapid discharge or shutdowns related to battery deterioration to be repaired. Its identification through the BN6E code facilitates component selection and use in professional repairs of Xiaomi devices.

- Brand:Xiaomi.

- Battery reference:BN6E.

- Part number:1330101000284B.

- Quality:Service Pack.

- Component type:Rechargeable internal battery.

- Technology:Lithium-ion (Li-ion).

- Typical capacity:6500 mAh.

- Nominal voltage:3.87 V.

- Adhesive:Includes battery mounting adhesive.

- Compatible model:Xiaomi Redmi Note 15 Pro 4G.

- Technical model:25100RA69G.

The BN6E Service Pack battery is identified by manufacturer part number 1330101000284B, facilitating its location in spare parts catalogues and the selection of the appropriate component in the workshop. Its typical capacity of 6500 mAh allows a deteriorated unit to be replaced with another matching the power supply specifications corresponding to the Xiaomi Redmi Note 15 Pro 4G.

The included mounting adhesive facilitates positioning the battery in its housing during installation. Its specific format allows replacement while preserving the internal layout of the device. It is a solution intended for repair technicians who need to resolve battery life or power supply problems and subsequently check device startup, charging operation and operating stability.

- Completely power off the device and use electrostatic discharge (ESD) protection during the repair.

- Disconnect the existing battery before working on the internal components of the device.

- Carefully remove the previous battery and clean any adhesive residue remaining in its housing.

- Position the new BN6E battery in its corresponding location, using the supplied mounting adhesive.

- Align the power flex cable and connect it without forcing the contacts or applying excessive pressure to the connector.

- Check device startup, battery recognition and charging system operation before final closure.

- Replace the back cover adhesive and check its correct attachment and sealing.

- After installation, perform a full charge and check how the battery percentage changes during normal operation.