Battery BP4H by Xiaomi Redmi Note 12 Discovery Edition 22101316UC 22101316UP 4300 mAh premium quality

BP4H Battery for Xiaomi Redmi Note 12 Discovery Edition 22101316UC 22101316UP 4300 mAh Premium Quality

BP4H battery for Xiaomi Redmi Note 12 Discovery Edition, also known as Redmi Note 12 Explorer Edition, technical models 22101316UC and 22101316UP, in premium quality. This replacement part is designed to restore the autonomy, power stability and correct operation of the device when the installed battery shows degradation, accelerated discharge, unexpected shutdowns or charging problems. Its internal dual-cell configuration is prepared for the specific power system of this variant and must be checked before permanent installation.

The BP4H battery offers a combined typical capacity of 4300 mAh and operates at a voltage of 7.74 V. Its dual-cell structure allows it to manage the high charging power used by the Redmi Note 12 Discovery Edition. Some labels may show the individual capacity of each cell, so an indication close to 2090 mAh or 2150 mAh does not represent the total combined capacity of the module. It is manufactured with rechargeable lithium polymer technology.

Premium quality provides a stable power supply, good performance during charging cycles and a suitable fit inside the internal compartment. This replacement part is intended for workshops and professionals who need to replace the battery without modifying the electrical system of the device. The BP4H reference, voltage, flex cable shape, connector and contact position must always be compared before installation.

Available for immediate shipping from Spain.

Installation advice

Completely disconnect the device before starting the repair.

Use ESD protection and suitable tools to handle the internal components.

Do not bend, pierce or excessively heat either cell.

Compare the BP4H reference, flex cable and connector with the removed battery.

Perform a power-on and charging test before permanently securing the battery.

Check charging stability and device temperature.

Replace the internal adhesives and remove residue from the previous installation.

Complete several normal charging cycles to stabilise the capacity reading.

Notice

This battery is specific to the Xiaomi Redmi Note 12 Discovery Edition or Redmi Note 12 Explorer Edition. It must not be confused with the Redmi Note 12, Redmi Note 12 5G, Redmi Note 12 Pro 5G or Redmi Note 12 Pro Plus 5G, as they use different batteries and electrical configurations. Before installation, compare the BP4H reference, technical model, voltage, flex cable shape, connector and contact position.

Technical table