Battery BP4N 4420mAh by Xiaomi Pad 6 23043RP34C 23043RP34G 23043RP34I premium quality

The BP4N 4420mAh battery for Xiaomi Pad 6 23043RP34C, 23043RP34G and 23043RP34I is a Premium quality compatible replacement part designed to replace one of the cells in the tablet's power supply system. It features lithium-ion polymer technology and a nominal voltage of 3.87V. The 4420mAh capacity corresponds to an individual cell, while the device uses a dual-cell system with a total typical capacity of 8840mAh. This component allows the repair of battery life, charging or shutdown problems associated with battery wear, making it suitable for repair shops specializing in Xiaomi tablets.

- Component type:rechargeable internal tablet battery.

- Compatible brand:Xiaomi.

- Commercial model:11-inch Xiaomi Pad 6.

- Compatible technical models:23043RP34C, 23043RP34G and 23043RP34I.

- Battery reference:BP4N.

- Typical capacity:4420mAh per cell.

- Minimum rated capacity:4320mAh.

- Nominal voltage:3.87V.

- Typical energy:approximately 17.1Wh.

- Technology:lithium-ion polymer (Li-ion Polymer / Li-Po).

- Quality:compatible Premium.

- Connection system:internal flex connection.

- Format:internal battery for the Xiaomi Pad 6 power supply system.

- Main function:electrical energy storage and supply to the device.

- Application:replacement of batteries with reduced capacity, shorter battery life or power supply problems associated with wear.

The Premium BP4N battery offers a replacement alternative to restore the Xiaomi Pad 6's energy storage capacity when one of its cells shows significant deterioration. Its typical capacity of 4420mAh and nominal voltage of 3.87V correspond to the electrical characteristics of the BP4N reference used in this tablet.

Lithium-ion polymer technology allows energy to be stored in a compact format adapted to the device's internal space. Its flex connection system facilitates integration during repair operations.

Compatibility with variants 23043RP34C, 23043RP34G and 23043RP34I allows this replacement part to be used across different markets. It is a practical solution for repair shops performing Xiaomi tablet maintenance and replacing deteriorated power supply components.

- Completely power off the tablet and disconnect any power source before beginning disassembly.

- Use appropriate tools and electrostatic discharge (ESD) protection.

- Apply controlled heat around the screen perimeter to facilitate separation of the fixing adhesive.

- Carefully remove the screen and access the internal battery compartment, protecting flex cables and connectors.

- Disconnect the power supply system before handling other electronic components.

- Identify the position of the BP4N battery to be replaced and check the arrangement of its connection.

- Carefully remove the fixing adhesives and extract the deteriorated battery without deforming its structure.

- Place the new BP4N battery in its housing, respecting the orientation and position of the flex cable.

- Correctly align the connector and establish the connection without forcing the contacts.

- Check power-on operation, battery detection and charging system functionality before closing the tablet.

- Perform a full charge and check battery percentage stability during a normal usage cycle.

- Remove adhesive residue, replace the necessary fixing materials and complete assembly, verifying the correct fit of the screen.