Battery by Apple MacBook Pro 13 2018 A1964 020-02497 Z0V7-MR9Q9 A1989 5086 mAh

A1964 5086 mAh Battery for Apple MacBook Pro 13 A1989 A2251 2018 2019 2020 020-02497 616-00419

A1964 replacement battery for Apple MacBook Pro 13 inch compatible with A1989 2018 and 2019 models and A2251 2020 equipped with four Thunderbolt 3 ports. It is designed to replace a deteriorated battery with reduced autonomy, unexpected shutdowns or charging problems, maintaining the electrical specifications corresponding to this assembly: 5086 mAh, 58 Wh and 11.41 V. Compatibility includes MacBookPro15,2 and MacBookPro16,2 identifiers and EMC 3214, 3358 and 3348. Before installation, the reference of the installed battery and the exact configuration of the device must be checked.

Specifications

A1964 lithium ion battery.

Nominal capacity of 5086 mAh.

Nominal energy of 58 Wh.

Nominal voltage of 11.41 V.

Compatible with MacBook Pro 13 inch A1989 and A2251 in the indicated versions.

Known associated references: A1964, 020-02497, 616-00419, 820-01118 and 2217-2548.

This battery allows the autonomy and power stability of the MacBook Pro to be restored when the installed battery shows wear, low capacity or high charge cycles. Its format is specifically intended for compatible 13 inch variants with four Thunderbolt 3 ports using A1964. To reduce installation errors, it is advisable to check both the A1989 or A2251 technical model and the EMC and the reference printed on the removed battery. After installation, a full charge should be performed and battery recognition, operation with the adapter and progressive discharge should be checked before permanently closing the device.

Installation tips

Disconnect the device and power adapter before starting the repair.

Use ESD protection while handling internal components.

Check that the removed battery corresponds to reference A1964 or a compatible equivalent reference.

Do not force connectors or flex cables during disassembly and assembly.

Carefully remove adhesive residue before installing the new battery.

Perform a power on and charging test before final closure.

After installation, perform a full charging cycle and check battery stability.

Technical table

Known commercial compatibilities include MR9Q2, MR9R2, MR9T2, MR9U2 and MR9V2 for A1989 2018; MV962, MV972, MV982, MV992 and MV9A2 for A1989 2019; and MWP42, MWP52, MWP62, MWP72 and MWP82 for A2251 2020. These references may have different regional suffixes.