Macbook Retina Pro A1989 13" 2018 repuestos

Technical Characteristics of Macbook Retina Pro A1989 13" 2018 Repuestos

The Macbook Retina Pro A1989, released in 2018, is an impressive device equipped with powerful features. Understanding these specifications can assist in the task of replacing components.

• Display: 13.3-inch (diagonal) LED-backlit display with IPS technology; 2560-by-1600 native resolution at 227 pixels per inch
• Processor: 2.3GHz quad-core Intel Core i5, Turbo Boost up to 3.8GHz, with 128MB of eDRAM
• Storage: 256GB/512GB/1TB SSD
• Memory: 8GB/16GB of 2133MHz LPDDR3 onboard memory
• Graphics: Intel Iris Plus Graphics 655
• Operating System: MacOS High Sierra

Instructions for Replacing Macbook Retina Pro A1989 13" 2018 Repuestos

Note: It is advised to have a professional handle the replacement of any Macbook components. However, should you wish to proceed on your own, follow these instructions:

Step 1: Power Off the Device

Ensure the MacBook is completely powered down and that the power adapter is unplugged.

Step 2: Remove the Bottom Case

Remove the ten pentalobe screws that secure the bottom case. Once done, carefully take off the bottom case.

Step 3: Disconnect the Battery Connector

Locate the small board near the battery. Tug the small clear loop to disconnect the battery connector from the logic board.

Step 4: Remove the Required Parts

This could mean the battery, SSD or the memory. For each of them, you may need to unscrew any screws securing the part in place and carefully remove it from the system board.

Step 5: Install the New Part

Place your new part in the same location where you removed the old part. Replace and tighten any screws that were removed.

Step 6: Reconnect the Battery Connector

Reconnect the battery and place the bottom case back. Finally, secure it with the ten pentalobe screws you initially removed.