Battery EB-BA546ABY 5000mAh by Samsung Galaxy A34 5G A346B A55 A54 A25 GH82-31469A Service Pack

EB-BA546ABY 5000 mAh Battery for Samsung Galaxy A25 5G A256B, A34 5G A346B, A35 5G A356B, A54 5G A546B and A55 5G A556B GH82-31469A Service Pack

Samsung Service Pack EB-BA546ABY battery for Samsung Galaxy A25 5G SM-A256B, Galaxy A34 5G SM-A346B, Galaxy A35 5G SM-A356B, Galaxy A54 5G SM-A546B and Galaxy A55 5G SM-A556B. This replacement part is designed to restore the autonomy, charging stability and electrical supply of the device. It offers a typical capacity of 5000 mAh, a rated capacity of 4905 mAh and a voltage of 3.88 V. Service reference GH82-31469A identifies the part within the Samsung technical catalogue.

Specifications

Brand: Samsung

Battery model: EB-BA546ABY

Part number: GH82-31469A

Typical capacity: 5000 mAh

Rated capacity: 4905 mAh

Voltage: 3.88 V

Technology: lithium ion

Quality: Service Pack

Compatibility: Samsung Galaxy A25 5G SM-A256B, Galaxy A34 5G SM-A346B, Galaxy A35 5G SM-A356B, Galaxy A54 5G SM-A546B and Galaxy A55 5G SM-A556B

Service Pack quality provides dimensions, connector and electrical parameters suitable for the compatible devices. It restores autonomy when the installed battery shows wear, accelerated charge loss, unexpected shutdowns or difficulties completing power cycles correctly.

Its protection electronics help control charging, discharging and temperature during operation. The precise fit simplifies assembly and reduces the risk of internal movement or stress on the flex cable. It is a solution intended for workshops looking for a stable, safe repair in accordance with the technical specifications of the device.

Available for immediate shipping from Spain.

Installation Advice

Disconnect the device and use ESD protection before starting the repair.

Check that the EB-BA546ABY reference, connector and flex cable arrangement match the removed battery.

Do not bend, pierce, strike or apply direct pressure to the cell.

Completely remove the remains of the previous adhesive and clean the mounting surface.

Use battery-specific adhesive and avoid applying liquids directly to the cell.

Perform a power-on, charging, consumption and temperature test before closing the device.

Check that the battery percentage increases correctly during charging.

Complete a controlled charging cycle to stabilise the percentage reading.

Technical Table