Battery EB-BG715BBE 3950mAh by Samsung Galaxy XCover Pro G715F GH43-04993A Service Pack

 The Samsung EB-BG715BBE battery for Galaxy XCover Pro SM-G715F is an original Service Pack replacement identified by part number GH43-04993A. It is also compatible with the SM-G715FN, SM-G715FN/DS, SM-G715U, SM-G715U1, SM-G715A and SM-G715W variants. It features a minimum rated capacity of 3950 mAh, a typical capacity of 4050 mAh and a nominal voltage of 3.85 V. Its removable design allows the replacement of deteriorated batteries experiencing reduced battery life, rapid discharge or unexpected shutdowns. It is intended for professional maintenance and repairs, retaining the electrical characteristics and connection system of the factory-installed component.

 - Brand:Samsung.

 - Battery model:EB-BG715BBE.

 - Part number (Part No):GH43-04993A.

 - Minimum rated capacity:3950 mAh.

 - Typical capacity:4050 mAh.

 - Nominal voltage:3.85 V.

 - Rated energy:15.21 Wh.

 - Typical energy:15.59 Wh.

 - Technology:rechargeable lithium-ion battery (Li-ion).

 - Component type:removable battery with integrated electrical contacts.

 - Installation system:direct placement in the battery compartment, without adhesives or flexible connections.

 - Samsung Galaxy XCover Pro:SM-G715F, SM-G715FN and SM-G715FN/DS, European and international versions.

 - Regional variants:SM-G715U, SM-G715U1, SM-G715A and SM-G715W, North American versions.

 - Quality:original Samsung Service Pack.

 The Samsung EB-BG715BBE Service Pack battery helps restore the Galaxy XCover Pro's battery life when the previous battery has lost capacity due to wear and accumulated charging cycles. Its typical capacity of 4050 mAh and nominal voltage of 3.85 V maintain the energy specifications corresponding to the device.

 Its main advantage is the removable design, which facilitates replacement by removing the rear cover, without needing to disassemble other internal components. The integrated electrical contacts allow the battery to be placed directly into its compartment.

 As an original Service Pack replacement, it retains the format and characteristics of the factory-installed component. Part number GH43-04993A simplifies its identification and management in professional repair services, particularly for maintaining devices used in working environments.

 - Completely switch off the device before removing the battery and use electrostatic discharge (ESD) protection.

 - Remove the rear cover using the notch located at the top of the device.

 - Remove the previous battery using the recess located along its lower edge.

 - Position the EB-BG715BBE battery in the compartment, correctly aligning the gold electrical contacts with those on the phone.

 - Check that the battery is correctly seated and that the contacts maintain a proper connection.

 - Refit the rear cover and press evenly along its edges until the device is fully closed and sealed.

 - Switch on the phone and check battery recognition, charge percentage and general operation.

 - Perform a normal charging cycle and check the battery percentage progression to verify its reading.