Battery EB-BG736BBE 4050mAh by Samsung Galaxy XCover6 Pro SM-G736B premium quality

The EB-BG736BBE 4050 mAh battery for Samsung Galaxy XCover6 Pro 5G SM-G736B and SM-G736B/DS is a Premium-quality replacement designed to replace the phone's removable battery. It is also compatible with the SM-G736U, SM-G736U1 and SM-G736W variants. Its lithium-ion technology, nominal voltage of 3.85 V and integrated electrical contacts allow replacement directly through the rear battery compartment. It is intended for repairing devices experiencing reduced battery life, rapid discharge or shutdowns caused by battery wear, and is particularly practical for technical service centres and maintenance of professional mobile devices.

• Component type: Removable replacement battery for smartphones.

• Battery reference: EB-BG736BBE.

• Typical capacity: 4050 mAh.

• Minimum rated capacity: 3950 mAh.

• Nominal voltage: 3.85 V.

• Typical energy: 15.59 Wh.

• Rated energy: 15.21 Wh.

• Technology: Lithium-ion (Li-ion).

• Compatible models: Samsung Galaxy XCover6 Pro 5G.

• European and international technical models: SM-G736B and SM-G736B/DS.

• US technical models: SM-G736U and SM-G736U1.

• Canadian technical model: SM-G736W.

• Connection system: Integrated electrical contacts.

• Installation type: Removable battery accessed through the rear cover, without requiring flex connections or mounting adhesives.

• Quality: Premium.

The EB-BG736BBE Premium battery allows a deteriorated unit in the Samsung Galaxy XCover6 Pro 5G to be replaced when its energy storage capacity has decreased due to use and charging cycles. Its typical capacity of 4050 mAh and nominal voltage of 3.85 V correspond to the electrical characteristics of this reference, making it easier to select the appropriate replacement.

Its removable design provides an advantage for technical service centres, as replacement can be carried out by removing the rear cover without disassembling the internal components of the device. The integrated electrical contacts simplify installation and functional checks. It is a Premium-quality alternative particularly practical for maintaining devices used in professional, industrial and fieldwork environments.

• Completely power off the device before removing the battery and use electrostatic discharge (ESD) protection.

• Remove the Samsung Galaxy XCover6 Pro rear cover using the designated opening area on the housing.

• Extract the deteriorated battery by carefully lifting it from the lower recess of the compartment.

• Check the EB-BG736BBE reference and inspect the condition of the phone's electrical contacts.

• Insert the new battery into its compartment, correctly aligning the metal contacts without applying excessive pressure.

• Check that the battery is fully seated and maintains a proper connection.

• Refit the rear cover and press evenly along its edges until fully closed, checking that the sealing gasket is correctly seated.

• Switch on the device and verify battery recognition, charge percentage and power system operation.

• Perform a charging test and check the progression of the battery percentage during use.