Battery EB-BS926ABY 4900mAh by Samsung Galaxy S24 Plus 5G SM-S926 premium quality

EB-BS926ABY 4900mAh Battery for Samsung Galaxy S24 Plus 5G SM-S926 premium quality

EB-BS926ABY internal battery for Samsung Galaxy S24 Plus 5G SM-S926 in premium quality designed to restore autonomy and stable operation of the device. This replacement part allows correct charging cycles, longer usage time and safe power supply for the board to be recovered. It includes 4900mAh typical capacity and maintains the correct format for professional replacement. It includes verified compatibility with Samsung Galaxy S24 Plus 5G SM-S926 and EB-BS926ABY reference. Intended for workshop installation, previous charging test and calibration before the final closure of the device.

Specifications

Internal battery compatible with Samsung Galaxy S24 Plus 5G SM-S926, including SM-S926B, SM-S926B/DS, SM-S926U, SM-S926U1, SM-S926W, SM-S926N, SM-S9260, SM-S926E and SM-S926E/DS variants. Replacement part indicated to replace degraded, swollen batteries, with unexpected shutdowns, irregular charging or noticeable loss of autonomy. The EB-BS926ABY reference must match the battery installed in the device to guarantee correct assembly and avoid incompatibilities due to regional variant, flex, physical format or connector position.

Premium quality guarantees stable performance, good charge retention and correct fit in the internal housing of the device. This battery is aimed at professional repairs that seek to recover autonomy without compromising the electrical safety of the equipment. It allows usage duration to be improved, shutdowns due to voltage drop to be reduced and more regular charging to be restored. It is recommended to perform a power on test, check consumption, verify charging with a suitable charger and complete an initial calibration after installation. Available for immediate shipping from Spain.

Installation tips

Disconnect the old battery before handling any internal flex or connector.

Use ESD protection and suitable tools to avoid damage to the board or connectors.

Check that the EB-BS926ABY reference matches the battery removed from the device.

Also verify the connector position, the flex and the physical format before assembly.

Perform a charging and power on test before closing the chassis.

Do not force the connection flex and verify that it is correctly seated.

Calibrate the battery after installation with a complete controlled charge and discharge cycle.

Notice

Before installation, always check the battery fitted in the device. Some Samsung models may have regional variants or different internal references depending on the sales region. Always compare the reference printed on the original battery, the technical model of the device, the flex and the connector position before assembly.

Technical table