Battery EB-BS936ABE 4900mAh by Samsung Galaxy S25 FE SM-S731B GH82-38432A Service Pack

EB-BS936ABE 4900mAh battery for Samsung Galaxy S25 FE 5G SM-S731B GH82-38432A Service Pack

EB-BS936ABE 4900mAh battery for Samsung Galaxy S25 FE 5G SM-S731B in Service Pack quality, designed to recover the autonomy and energy stability of the device. This spare part allows a degraded, swollen, damaged or performance-losing battery to be replaced, restoring a more stable charging response and suitable duration for daily use to the terminal.

The GH82-38432A reference is intended for professional assembly in Samsung Galaxy S25 FE 5G and maintains direct compatibility with the internal layout of the device. It is a recommended part when the device discharges quickly, turns off with remaining percentage, does not maintain stable charging cycles or shows clear symptoms of chemical wear in the battery.

Key features

EB-BS936ABE battery for Samsung Galaxy S25 FE 5G.

Compatible with technical model SM-S731B.

Samsung reference GH82-38432A.

4900mAh capacity.

Service Pack spare part for professional repair.

Designed to recover autonomy, stable charging and correct energy operation.

Service Pack quality guarantees precise fitting inside the internal housing of the terminal, correct connection with the board and reliable performance when installation is carried out following the proper technical procedure. This battery allows the Samsung Galaxy S25 FE 5G to recover more balanced autonomy, reducing unexpected shutdowns, sudden percentage drops and problems caused by an aged battery.

It is a spare part aimed at technicians and workshops looking for a solution identified by reference, suitable for professional repairs and prepared to restore the energy behaviour of the device. It is recommended to perform a charging test, consumption check and initial calibration before the final closure of the terminal. Available for immediate shipping from Spain.

Installation tips

Turn off the terminal and always work with ESD protection.

Remove the rear cover using controlled heat and suitable tools.

Disconnect the battery before handling other internal components.

Do not bend, puncture or press the battery during disassembly or installation.

Verify that the connector is perfectly aligned before applying pressure.

Perform a partial charging and discharging test before final closure.

Calibrate the battery after installation with a full charging cycle.

Technical table