Battery EB-BX516ABY 8000mAh by Samsung Galaxy Tab S9 FE SM-X510 SM-X516B SM-X518U premium quality

EB-BX516ABY 8000mAh Battery for Samsung Galaxy Tab S9 FE SM-X510 SM-X516B SM-X518U Premium Quality

EB-BX516ABY internal battery for Samsung Galaxy Tab S9 FE 10.9-inch, compatible with the SM-X510, SM-X516B and SM-X518U technical models. This premium-quality replacement part is designed to restore the autonomy, charging stability and power supply of the tablet. It has a typical capacity of 8000 mAh, a minimum rated capacity of 7760 mAh and a nominal voltage of 3.86 V. Its format, flex cable and connector are prepared for the internal configuration of the Galaxy Tab S9 FE.

This replacement part is suitable when the installed battery shows reduced operating time, accelerated discharge, unexpected shutdowns, abnormal heating or difficulties completing the charge. Premium quality provides stable energy delivery during charging and discharging cycles, facilitating a reliable and durable repair. Its precise fit allows the deteriorated battery to be replaced without modifying other internal components. It is a workshop-oriented solution intended to reduce repeat repairs and restore the normal energy performance of the tablet.

The EB-BX516ABY reference can also be identified by the Samsung part number GH82-32744A. Before final installation, the printed reference, technical model of the tablet, flex cable shape, connector and contact position must be checked. A complete power-on, charging, consumption and thermal stability test is recommended before applying the adhesives and closing the device. Available for immediate shipping from Spain.

Installation Advice

Completely turn off the tablet and disconnect the battery before handling other components.

Use ESD protection throughout the repair.

Check that the removed battery uses the EB-BX516ABY reference.

Verify that the technical model is SM-X510, SM-X516B or SM-X518U.

Compare the flex cable shape, connector and contact position.

Perform a power-on and charging test before closing the device.

Monitor the temperature during the first complete charge.

Do not bend, pierce or apply pressure to the cell.

Remove previous residue and use new adhesives to secure the battery.

Perform several normal charging cycles to stabilise the capacity reading.

Technical Table