Battery EB-BX716ABY 8400mAh by Samsung Galaxy Tab S9 SM-X710 SM-X716B SM-X716N premium quality

EB-BX716ABY 8400mAh Battery for Samsung Galaxy Tab S9 SM-X710 SM-X716B SM-X716N Premium Quality

EB-BX716ABY internal battery for Samsung Galaxy Tab S9 11-inch, compatible with the SM-X710 Wi-Fi version and the SM-X716B and SM-X716N 5G variants. This premium-quality replacement part is designed to restore the autonomy, charging stability and power supply of the tablet. It has a typical capacity of 8400 mAh, a rated capacity of 8160 mAh, a voltage of 3.88 V and an energy rating of 32.59 Wh. Its format, flex cable and connector correspond to the internal configuration of the Galaxy Tab S9.

This replacement part is suitable when the installed battery shows a considerable loss of autonomy, accelerated discharge, unexpected shutdowns, abnormal heating or difficulties completing the charge. Premium quality provides stable electrical delivery during charging and discharging cycles, as well as a precise fit to facilitate professional installation. It restores the normal operation of the tablet without replacing other components and helps reduce possible repeat failures caused by a degraded battery.

The EB-BX716ABY reference can also be identified by the Samsung part number GH82-31774A. Before final installation, the reference printed on the removed battery, the technical model of the tablet, the flex cable shape, connector and contact position must be checked. Complete power-on, charging, consumption and thermal stability tests are recommended before applying the adhesives and closing the device. Available for immediate shipping from Spain.

Installation Advice

Completely turn off the tablet and disconnect the battery before handling other components.

Use ESD protection throughout the repair.

Check that the removed battery uses the EB-BX716ABY reference.

Verify that the technical model corresponds to SM-X710, SM-X716B or SM-X716N.

Compare the flex cable shape, connector and contact position.

Perform a power-on and charging test before closing the device.

Monitor consumption and temperature during the first complete charge.

Do not bend, pierce or apply pressure to the cell.

Remove previous residue and use new adhesives to secure the battery.

Perform several normal charging cycles to stabilise the capacity reading.

Technical Table