Battery EB-BX818ABY 10090mAh by Samsung Galaxy Tab S9 Plus Tab S9 FE Plus premium quality

EB-BX818ABY 10090mAh Battery for Samsung Galaxy Tab S9 Plus and Tab S9 FE Plus Premium Quality

EB-BX818ABY internal battery for Samsung Galaxy Tab S9 Plus and Samsung Galaxy Tab S9 FE Plus 12.4-inch. It is compatible with Galaxy Tab S9 Plus SM-X810, SM-X816B, SM-X816N, SM-X818U, SM-X818A, SM-X818R4 and SM-X818V, as well as Galaxy Tab S9 FE Plus SM-X610 and SM-X616B. This premium-quality replacement part is designed to restore the autonomy, charging stability and power supply of the tablet. It has a typical capacity of 10090 mAh and a rated capacity of 9800 mAh.

Premium quality guarantees stable electrical delivery during charging and discharging cycles, a precise fit and a firm connection to the device board. It is suitable when the installed battery shows accelerated discharge, reduced autonomy, unexpected shutdowns, abnormal heating or difficulties completing the charge. Its format allows the same reference to be used in the Galaxy Tab S9 Plus and Galaxy Tab S9 FE Plus families, although Samsung uses different service part numbers depending on the model and distribution.

The EB-BX818ABY reference may be associated with Samsung part numbers GH82-31907A and GH82-32756A. Before final installation, the reference printed on the removed battery, the technical model of the tablet, the flex cable shape, connector and contact position must be checked. Complete power-on, charging, consumption and thermal stability tests are recommended before installing the adhesives and closing the device. Available for immediate shipping from Spain.

Installation Advice

Completely turn off the tablet and disconnect the battery before handling other components.

Use ESD protection throughout the repair.

Check that the removed battery uses the EB-BX818ABY reference.

Verify the technical model of the tablet before installation.

Compare the flex cable shape, connector and contact position.

Perform a power-on and charging test before closing the device.

Monitor consumption and temperature during the first complete charge.

Do not bend, pierce or apply pressure to the cells.

Remove previous residue and use new adhesives to secure the battery.

Perform several normal charging cycles to stabilise the capacity reading.

Technical Table