Battery HB30A7C1ECW 6000mAh by Huawei MediaPad M6 8.4 VRD-AL09 VRD-W09 VRD-AL10 VRD-W10 premium quality

HB30A7C1ECW 6000mAh Battery for Huawei MediaPad M6 8.4 VRD-AL09 VRD-W09 VRD-AL10 VRD-W10 Premium Quality

Internal HB30A7C1ECW battery for Huawei MediaPad M6 8.4 and Huawei MediaPad M6 Turbo 8.4 in premium quality, designed to restore the tablet’s autonomy and power stability. It is compatible with the LTE and WiFi versions identified by the VRD-AL09, VRD-W09, VRD-AL10 and VRD-W10 technical models.

This replacement part has a capacity of 6000mAh, a nominal voltage of 3.82V and an energy rating of 22.92Wh. It maintains the format, flex cable and connector layout required for professional installation.

Specifications

Internal rechargeable lithium polymer battery.

Capacity of 6000mAh.

Nominal voltage of 3.82V.

Energy rating of 22.92Wh.

Compatible with Huawei MediaPad M6 8.4 LTE VRD-AL09.

Compatible with Huawei MediaPad M6 8.4 WiFi VRD-W09.

Compatible with Huawei MediaPad M6 Turbo 8.4 LTE VRD-AL10.

Compatible with Huawei MediaPad M6 Turbo 8.4 WiFi VRD-W10.

Battery reference HB30A7C1ECW.

Premium quality provides stable power delivery, good fit inside the internal housing and a firm connection to the motherboard. It is suitable for replacing degraded or swollen batteries, batteries with reduced autonomy, irregular charging or unexpected shutdowns.

Its configuration helps restore adequate operating time and maintain stability during charging and discharging cycles. It is a solution intended for repair shops looking for assembly precision, consistent performance and a good balance between quality and cost.

Before installation, the printed reference, battery format, flex cable position, connector and contact layout must be checked. The tablet’s commercial name alone must not be used to confirm compatibility.

Available for immediate shipping from Spain.

Installation Tips

Completely disconnect the tablet and use ESD protection.

Check that the printed reference is HB30A7C1ECW before removing the adhesives.

Compare the format, flex cable, connector and contact position with the removed battery.

Do not bend, puncture or apply localised pressure to the cells.

Carefully remove residue from the previous adhesive.

Use battery-specific adhesives to secure the battery without deforming it.

Perform a charging and discharging test before closing the tablet.

Check the temperature, standby consumption and battery percentage reading.

Technical Table