Battery HB436797EGW 5200mAh premium quality

The HB436797EGW 5130 mAh premium quality battery is an internal replacement part designed for repairing Honor smartphones. Its possible compatibilities include the Honor X5c 4G, Honor X5c Plus 4G and Honor X6d 5G, including technical variants NLA-LX1, NLA-LX2, NLA-LX2P, NLA-LX3, NLA-NX1 and NLA-NX3. It uses lithium-ion polymer technology, with a reference typical capacity of 5260 mAh and a nominal voltage of 3.89 V. It is designed to replace deteriorated batteries experiencing reduced battery life, rapid discharge, difficulty maintaining a charge or unexpected shutdowns, facilitating professional repairs.

- Compatible brand: Honor.

- Battery reference: HB436797EGW.

- Possible compatibilities: Honor X5c 4G, Honor X5c Plus 4G and Honor X6d 5G.

- Honor X5c 4G: NLA-LX1, NLA-LX2 and NLA-LX3.

- Honor X5c Plus 4G: NLA-LX1, NLA-LX2P and NLA-LX3.

- Honor X6d 5G: NLA-NX1 and NLA-NX3.

- Reference typical capacity: 5260 mAh.

- Rated capacity: 5130 mAh.

- Nominal voltage: 3.89 V.

- Nominal energy: 19.96 Wh.

- Technology: Lithium-ion polymer (Li-Po).

- Component type: Internal rechargeable battery.

- Quality: Premium.

The premium quality HB436797EGW battery provides a replacement solution for Honor devices experiencing wear or reduced performance in their internal battery. Its rated capacity of 5130 mAh and lithium-ion polymer technology allow the deteriorated component to be replaced, helping restore the phone's battery life.

Its reference is associated with different models in the Honor X range, including the X5c, X5c Plus and X6d, expanding the possible applications of this replacement part in professional repair services. Identification through the HB436797EGW code makes it easier to compare the replacement with the previously installed battery and select the appropriate component.

It is a practical alternative for professionals seeking to address rapid discharge, reduced battery life and shutdowns associated with battery deterioration, extending the device's useful life.

- Completely power off the device and disconnect the battery before handling internal components, using ESD protection.

- Carefully remove the rear cover and dismantle the installed battery using appropriate tools.

- Compare the complete reference, dimensions, connector position and flex cable with those of the removed battery, including any identification suffixes.

- Clean any adhesive residue and properly prepare the battery compartment before installing the new replacement.

- Position the battery correctly and connect the flex cable without applying excessive pressure.

- Check phone startup, battery detection and charging system operation before final closure.

- Perform a full charge and subsequently check the battery percentage progression during normal use.

- Replace the closing adhesives and ensure the rear cover is evenly secured.