Battery HB486492EGW 4800mAh by Honor 80 ANN-AN00 premium quality

HB486492EGW 4800mAh Battery for Honor 80 ANN-AN00 Premium Quality

HB486492EGW replacement battery for Honor 80, technical model ANN-AN00, in premium quality and designed to restore the autonomy, charging stability and power supply of the device. It has a typical capacity of 4800 mAh, a rated capacity of 4700 mAh, a voltage of 3.89 V and an energy rating of 18.67 Wh. Its format, flex cable and connector are prepared for the internal configuration of this device. Intended for professional installation and complete testing before permanently closing the chassis.

This replacement part allows a deteriorated battery to be replaced when the Honor 80 shows accelerated discharge, unexpected shutdowns, a considerable reduction in autonomy, abnormal heating or difficulties completing the charge. Premium quality provides stable energy delivery during charging and discharging cycles, as well as a precise fit to facilitate installation. It is a workshop-oriented solution that helps reduce repeat repairs and restore the normal operation of the device without replacing other components.

The battery uses lithium-ion polymer technology and supports the fast charging system compatible with the Honor 80. Before final installation, the reference printed on the removed battery, the ANN-AN00 technical model, the flex cable shape, connector, voltage and contact position must be checked. Power-on, charging, consumption and thermal stability tests are recommended before applying the final adhesives. Available for immediate shipping from Spain.

Installation Advice

Disconnect the device and use ESD protection.

Check that the removed battery uses the HB486492EGW reference.

Verify that the technical model of the device is ANN-AN00.

Compare the flex cable shape, connector and contact position.

Perform a power-on and charging test before closing the chassis.

Monitor consumption and temperature during the first charge.

Do not bend, pierce or apply pressure to the cell.

Remove previous residue and replace the fixing adhesives.

Perform several normal charging cycles to stabilise the capacity reading.

Notice

This battery is verified for the Honor 80 ANN-AN00. It must not be confused with the Honor 80 SE battery, which has a different official capacity. Before installation, always check the reference printed on the removed battery, the technical model of the device, the flex cable, connector, voltage and contact position. Compatibility with Honor 80 SE, Honor 80 Pro or Honor 80 GT is not confirmed.

Technical Table