Battery HB496789EHW 5100mAh by Honor Magic 5 5G PGT-AN00 PGT-N09 premium quality

HB496789EHW 5100mAh battery for Honor Magic 5 5G PGT-AN00 PGT-N09 premium quality

HB496789EHW internal battery of 5100mAh for Honor Magic 5 5G in premium quality, compatible with technical models PGT-AN00 and PGT-N09. This spare part is designed to replace degraded, swollen batteries, with low autonomy, irregular charging, unexpected shutdowns or loss of performance after prolonged use cycles. Its format corresponds to the internal assembly of the Honor Magic 5 5G, maintaining the suitable capacity and voltage to restore the energy stability of the device. It is a solution aimed at professional repair, especially when the device shows fast discharge, unstable percentage, charging difficulty or restarts due to lack of energy. Before installation, it is recommended to always check the reference printed on the removed battery, the flex, the connector and the technical model of the device.

Key features

HB496789EHW internal battery for Honor Magic 5 5G.

Compatible with technical models PGT-AN00 and PGT-N09.

Capacity of 5100mAh.

Voltage of 3.91V.

Premium quality for professional repair.

Indicated to restore autonomy, charging stability and energy operation.

Suitable for fast discharge, unexpected shutdowns, swollen battery, unstable percentage or irregular charging failures.

Specific spare part for Honor Magic 5 5G, not valid for other Magic models without checking reference and format.

Advantages and quality

Premium quality offers a reliable solution to restore the energy performance of the Honor Magic 5 5G when the original battery has lost capacity or shows irregular behaviour. Its 5100mAh capacity restores suitable autonomy for daily use, reducing shutdown incidents, sudden percentage drops, restarts or unstable charging. Reference HB496789EHW makes spare part identification easier and helps avoid compatibility errors with other Honor batteries of similar format. For a safe repair, it is important to compare the removed battery with the new one before final closing, checking reference, flex, connector, voltage and contact position. Available for immediate shipping from Spain.

Installation tips

1. Turn off the device before starting the repair.
2. Disconnect the old battery before handling the board.
3. Use ESD protection throughout the process.
4. Check that the removed battery is HB496789EHW.
5. Check that the technical model of the device is PGT-AN00 or PGT-N09.
6. Check flex, connector, contact position and reference printed on the cell.
7. Do not bend or press the battery during installation.
8. Clean old adhesive residue before fixing the new battery.
9. Perform a power-on and charging test before closing the chassis.
10. Calibrate the battery after installation with a full charge and discharge cycle.

Notice

Before installation, always check the battery mounted in the device. Some Honor models may present regional variants or different internal references depending on the commercialization area. Always compare the reference printed on the original battery, the technical model of the device, the flex, the connector, the voltage and the contact position before final installation.

Technical table