Battery HB506591EHW 5000mAh by Honor 100 Pro MAA-AN10 Honor 100 MAA-AN00 Honor 90 GT premium quality

HB506591EHW 5000mAh Battery for Honor 100 Pro MAA-AN10 Honor 100 MAA-AN00 Honor 90 GT MAG-AN00 premium quality

HB506591EHW battery for Honor 100 Pro MAA-AN10, Honor 100 MAA-AN00 and Honor 90 GT MAG-AN00 in premium quality, designed to restore the autonomy, charging stability and power performance of the device. This replacement allows replacing a drained, swollen or capacity degraded battery, maintaining a correct fit in the verified compatible models. It integrates 5000mAh capacity, 3.91V voltage and Li Polymer chemistry. Designed for professional installation, previous charging test and consumption check before closing the chassis.

Specifications

Batteries: 5000mAh · 3.91V · Li Polymer

Compatibilities: Honor 100 Pro MAA-AN10, Honor 100 MAA-AN00, Honor 90 GT MAG-AN00

Part No: HB506591EHW

Premium quality ensures stable power supply, good response in charge and discharge cycles and suitable fit for professional repair. It is a solution indicated for terminals with unexpected shutdowns, reduced autonomy, irregular charging or battery degraded by use. Its format is prepared to respect the internal space of the device and facilitate assembly when previously compared with the installed part. Designed to reduce repeat repairs, improve daily autonomy and optimize workshop repair times. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling any internal flex.

Use ESD protection throughout the repair.

Check the HB506591EHW reference before installation.

Perform a charging test before closing the device.

Verify consumption, temperature and power on stability.

Do not force the connector or bend the battery flex.

Calibrate the battery after installation with a complete charge and discharge cycle.

Notice

Before installing, always check the battery fitted in the terminal. Some Honor models may have regional variants or different internal references depending on the sales area. Always compare the reference printed on the factory installed battery, the technical model of the device, the flex, the connector position and the measurements before removing adhesives or performing the final assembly.

Technical table