Battery HB506593EFW 4500mAh by Huawei Nova 10 Pro Nova 11 Pro Nova 10 SE premium quality

HB506593EFW 4500mAh Battery for Huawei Nova 10 Pro Nova 11 Pro Nova 10 SE premium quality

HB506593EFW battery for Huawei Nova 10 Pro GLA-AL00 GLA-LX1, Huawei Nova 11 Pro GOA-AL80 GOA-LX9 and Huawei Nova 10 SE BNE-LX1 BNE-LX3 in premium quality designed to restore autonomy, charging stability and power operation of the device. Huawei brand and technical models verified for this reference. This replacement part allows the substitution of degraded, swollen batteries or batteries with noticeable performance loss, maintaining stable power delivery during daily use. Includes safe compatibilities and part number HB506593EFW. Designed for professional installation, charging test and calibration before closing the chassis.

Specifications

Brand Huawei

Compatible models Huawei Nova 10 Pro, Huawei Nova 11 Pro, Huawei Nova 10 SE

Technical models GLA-AL00, GLA-LX1, GOA-AL80, GOA-LX9, BNE-LX1, BNE-LX3

Component internal battery

Capacity 4500mAh

Energy 17.41Wh

Voltage 3.87V

Chemistry lithium ion polymer

Part No HB506593EFW

Manufacturer code 02355FAT

Quality premium

Premium quality guarantees good charging stability, balanced autonomy and correct fit inside the terminal housing. It is intended for professional repairs where the goal is to restore the power performance of the Huawei Nova 10 Pro, Huawei Nova 11 Pro or Huawei Nova 10 SE without modifying the normal behaviour of the device. Its commercial capacity of 4500mAh, 17.41Wh energy and 3.87V voltage allow a suitable replacement when the battery presents exhausted cycles, unexpected shutdowns, irregular charging or swelling. We recommend checking the reference printed on the removed battery, performing a controlled first charge and verifying consumption, temperature and percentage before final closure. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling any internal flex.

Use ESD protection throughout the process.

Test the battery cold before closing the terminal.

Check that the connector fits without pressure or twisting.

Perform a controlled initial charge and verify temperature.

Replace internal adhesives if they have lost fixation.

Calibrate the battery percentage after installation.

Notice

Before installation, always check the battery installed in the terminal. Some Huawei models may have regional variants or different internal references depending on the marketing area. Always compare the reference printed on the factory-installed battery, the technical model of the device, the flex and the connector position before removing adhesives or closing the device. In this family, the HB506493EFW reference may also appear in some batches or suppliers, so the physical reference must always be verified before assembly.

Technical table