Battery HB506781EGW 4460mAh by Huawei Mate 50 y Mate 50E premium quality

HB506781EGW 4460mAh Battery for Huawei Mate 50 and Mate 50E Premium Quality

HB506781EGW replacement battery for Huawei Mate 50 CET-AL00 and CET-LX9, also compatible with Huawei Mate 50E CET-AL60. This premium-quality replacement part is designed to restore the autonomy, charging stability and electrical supply of the device. It has a typical capacity of 4460 mAh and uses lithium-ion polymer technology. Its format, flex cable and connector correspond to the CET technical family. It is prepared for professional installation and must be tested before permanently closing the chassis.

This replacement part is suitable when the installed battery shows reduced autonomy, accelerated discharge, unexpected shutdowns, abnormal heating or problems completing the charge. Premium quality provides stable energy delivery during charging and discharging cycles, helping to restore the normal operation of the device. Its verified compatibility with the international and Chinese variants of the Huawei Mate 50 facilitates professional repairs, reduces possible repeat failures and allows only the affected component to be replaced.

Before installation, the reference printed on the removed battery, the technical model of the device, the flex cable shape, connector and contact position must be compared. Compatibility must not be determined solely by the commercial name of the phone, as regional variants with different components may exist. Power-on, charging, consumption and thermal stability tests are recommended before applying the final adhesives. Available for immediate shipping from Spain.

Installation Advice

Disconnect the device and use ESD protection.

Check that the removed battery uses the HB506781EGW reference.

Verify that the technical model is CET-AL00, CET-LX9 or CET-AL60.

Compare the flex cable, connector and contact position before installation.

Perform a power-on and charging test before closing the chassis.

Monitor the temperature and consumption during the first charge.

Do not bend, pierce or apply pressure to the cell.

Replace the fixing adhesives and remove previous residue.

Perform several normal charging cycles to stabilise the capacity reading.

Notice

The Huawei Mate 50 and Mate 50E may be marketed in different regional variants. Before installing the battery, always check the reference printed on the removed part, the technical model of the device, the flex cable, connector, voltage and contact position. Compatibility is verified for Huawei Mate 50 CET-AL00 and CET-LX9, and Huawei Mate 50E CET-AL60. It is not compatible with Huawei Mate 50 Pro or Mate 50 RS.

Technical Table