Battery LC-196 6000mAh premium quality

The LC-196 6000 mAh premium quality battery is an internal replacement part designed for repairing Samsung smartphones. Its possible compatibilities include the Samsung Galaxy A07 5G SM-A076B, SM-A076E and SM-A076M, Galaxy M17e 5G SM-M076B, Galaxy F70e 5G SM-E076B and Galaxy A08 4G SM-A085F and SM-A085M. It uses lithium-ion polymer technology, with a typical capacity of 6000 mAh, a rated capacity of 5830 mAh and a nominal voltage of 3.90 V. It is designed to replace deteriorated batteries experiencing reduced battery life, rapid discharge, difficulty maintaining a charge or unexpected shutdowns, facilitating professional repairs.

- Compatible brand: Samsung.

- Battery reference: LC-196.

- Possible compatibilities: Samsung Galaxy A07 5G, Samsung Galaxy M17e 5G, Samsung Galaxy F70e 5G and Samsung Galaxy A08 4G.

- Samsung Galaxy A07 5G: SM-A076B, SM-A076B/DS, SM-A076E/DS, SM-A076M and SM-A076M/DS.

- Samsung Galaxy M17e 5G: SM-M076B and SM-M076B/DS.

- Samsung Galaxy F70e 5G: SM-E076B and SM-E076B/DS.

- Samsung Galaxy A08 4G: SM-A085F, SM-A085F/DS, SM-A085M and SM-A085M/DS.

- Typical capacity: 6000 mAh.

- Rated capacity: 5830 mAh.

- Nominal voltage: 3.90 V.

- Technology: Lithium-ion polymer (Li-Po).

- Component type: Internal rechargeable battery.

- Quality: Premium.

The premium quality LC-196 battery provides a replacement solution for Samsung smartphones experiencing wear or reduced performance in their internal battery. Its typical capacity of 6000 mAh makes it possible to replace the deteriorated component and help restore the device's battery life when the problems are related to battery degradation.

Its lithium-ion polymer technology and electrical characteristics facilitate replacement identification during technical repairs. The LC-196 reference is associated with different devices from the Galaxy A, M and F families, expanding its possible applications in specialized repair workshops.

It is a practical alternative for professional repair services seeking to address rapid discharge, unexpected shutdowns and reduced battery life, extending the phone's useful life through a functional repair.

- Completely power off the device and disconnect the battery before handling internal components, using ESD protection.

- Carefully remove the rear cover and dismantle the installed battery using appropriate tools.

- Compare the LC-196 reference, dimensions, connector position and flex cable with those of the removed battery.

- Clean any adhesive residue and properly prepare the battery compartment before installing the new replacement.

- Position the battery correctly, renew the mounting adhesive and connect the flex cable without applying excessive pressure.

- Check phone startup, battery detection and charging system operation before final closure.

- Perform a full charge and subsequently check the battery percentage progression during normal use.

- Replace the closing adhesives and ensure the rear cover is evenly secured.