Battery NT03 5000mAh by Nothing Phone 2A premium quality

The NT03 5000 mAh battery for Nothing Phone (2a) A142, Nothing Phone (2a) Plus A142P and CMF Phone 1 A015 is a Premium-quality replacement designed to replace the deteriorated internal battery of these devices. It features lithium-ion technology, a nominal voltage of 3.89 V and an energy rating of 19.45 Wh. It allows the repair of devices experiencing reduced battery life, rapid discharge, unexpected shutdowns or difficulty maintaining their charge due to battery wear. It is a suitable solution for technical service centres specialising in Nothing smartphone repair and maintenance.

• Component type: Internal replacement battery for smartphones.

• Battery reference: NT03.

• Capacity: 5000 mAh.

• Nominal voltage: 3.89 V.

• Nominal energy: 19.45 Wh.

• Technology: Lithium-ion (Li-ion).

• Compatible models: Nothing Phone (2a), Nothing Phone (2a) Plus and CMF Phone 1.

• Technical models: A142, A142P and A015.

• Quality: Premium.

The NT03 Premium battery allows the energy storage capacity of the Nothing Phone (2a), Phone (2a) Plus or CMF Phone 1 to be restored by replacing a deteriorated unit. Its 5000 mAh capacity and nominal voltage of 3.89 V correspond to the electrical characteristics of this reference, making it easier to select a suitable replacement for compatible models.

The NT03 identification helps professionals distinguish this battery from other references used in Nothing devices. Its lithium-ion technology provides a rechargeable power solution for everyday device operation. It is a Premium-quality alternative intended for battery life repairs, preventive maintenance and mobile device refurbishment.

• Completely power off the device, disconnect the battery and use electrostatic discharge (ESD) protection.

• Carefully remove the deteriorated battery using appropriate tools and clean away the remaining adhesive residue.

• Check the NT03 reference and correctly align the power connector without forcing the contacts or flex cable.

• Install the battery using suitable mounting adhesives and ensure correct positioning inside the battery compartment.

• Check device startup, battery recognition and charging system operation before final closure.

• Perform a charging test and check the stability of the battery percentage and its behaviour during use.

• Renew the closure adhesives and verify correct device assembly.