Cable Lightning A USB 2.0 USB Type A to Lightning white 200cm Aisens

Lightning USB 2.0 USB Type A to Lightning Cable White 200 cm

USB 2.0 cable with a USB Type A connector on one end and a Lightning connector on the other, designed for charging and data transfer on Apple devices compatible with a Lightning connection. Its 200 cm length provides greater freedom of movement and makes connection easier when the charger, computer or USB point is located away from the device. The white finish provides a clean and discreet appearance, suitable for home, professional or workshop use. It can be used with USB Type A chargers, computers, power banks and other compatible sources.

The USB Type A connector allows the cable to be used with a wide variety of chargers and equipment fitted with this port, while the Lightning end provides direct connection to compatible Apple devices. The USB 2.0 standard allows charging, synchronization and data transfer tasks. Its 200 cm length is especially practical for desks, bedside tables, vehicles and charging points where a greater distance is required between the power source and the device. The final charging speed and power will depend on the adapter used and the characteristics of the connected equipment.

Installation Tips

Check that the device uses a Lightning connection.

Insert both connectors completely without applying lateral pressure.

Use a USB Type A charger compatible with the electrical requirements of the device.

Avoid sharply bending the cable near the connectors.

Do not use the cable if it has cuts, deformation or damaged connectors.

For data transfer, check that the connected equipment supports synchronization via USB.

Notice

Charging speed and power depend on the charger, the connected device and the protocols supported by both devices. Available functions may vary depending on the Apple device used and the connected USB Type A power source.

Technical Table