Charger GaN 20W USB Type C PD3.0 QC4.0 USB Type A QC3.0 Black Aisens

Aisens ASCH-20W2P011-BK 20W GaN USB Type C PD3.0 QC4.0 USB Type A QC3.0 Black Charger

Aisens ASCH-20W2P011-BK GaN charger in black, designed for fast charging smartphones, tablets, cameras, consoles and other compatible devices through USB Type C and USB Type A. It offers a maximum power of 20 W through the USB Type C port with Power Delivery PD3.0 and QC4.0, while the USB Type A port supports QC3.0 up to 18 W. It incorporates GaN technology and an intelligent chip that detects the protocol of the connected device to adjust charging and improve compatibility and efficiency during use.

Specifications

Maximum power of 20 W.

One USB Type C port with PD3.0 and QC4.0.

One USB Type A port with QC3.0.

Input of 100 to 240 V, 50 to 60 Hz, 0.6 A.

USB Type C output of 5 V 3 A, 9 V 2.22 A and 12 V 1.67 A.

USB Type A QC3.0 output of 5 V 3 A, 9 V 2 A and 12 V 1.5 A.

Output when using USB Type C and USB Type A simultaneously of 5 V 3 A, 15 W in total.

Compatible with PD3.0, QC2.0, QC3.0, QC4.0, Huawei FCP, Samsung AFC, Apple 5 V 2.4 A and BC1.2 DCP.

Efficiency level VI.

Manufactured with flame retardant material.

Protection against overload and short circuit.

Black color.

Includes 20 W GaN charger and multilingual user manual.

GaN technology improves energy efficiency and reduces heat generation and size compared to traditional silicon based designs. Its combination of USB Type C and USB Type A makes it easier to use the same charger with devices and cables from different generations. The USB Type C port reaches up to 20 W, while USB Type A provides up to 18 W through QC3.0. The intelligent chip identifies compatible protocols and adapts the available power supply. It also allows two devices to be connected simultaneously, sharing a total power of up to 15 W when both ports are in use.

Installation advice

Use USB Type C or USB Type A cables suitable for the required power.

To obtain up to 20 W use the USB Type C port with a device compatible with the corresponding profile.

To take advantage of QC3.0 use the USB Type A port with a compatible device and cable.

Keep the charger in a ventilated area and avoid covering it during operation.

Check the protocol supported by the device to determine the maximum available charging power.

Disconnect the charger from the mains before cleaning or handling it.

Notice

The maximum power of 20 W corresponds to individual use of the USB Type C port. The USB Type A port can provide up to 18 W. When USB Type C and USB Type A are used simultaneously, the combined output changes to 5 V 3 A, with a maximum total power of 15 W. Actual charging speed will depend on the protocol supported by each device and the cable used.

Technical table