Charger GaN 20W USB Type C PD3.0 QC4.0 White Aisens

Aisens ASCH-20W2P010-W 20W GaN USB Type C PD3.0 QC4.0 USB Type A QC3.0 White Charger

Aisens ASCH-20W2P010-W GaN charger in white, designed to provide fast charging for smartphones, tablets, cameras, consoles and other compatible devices. It incorporates one USB Type C port with Power Delivery PD3.0 and QC4.0, as well as one USB Type A port compatible with QC3.0. USB Type C reaches a maximum power of 20 W, while USB Type A provides up to 18 W. GaN technology improves energy efficiency and reduces heat generation, while the integrated intelligent chip automatically detects the charging protocol compatible with the connected device.

Specifications

Maximum power of 20 W.

One USB Type C port.

One USB Type A port.

Input of 100 to 240 V, 50 to 60 Hz, 0.6 A.

USB Type C output of 5 V 3 A, 9 V 2.22 A and 12 V 1.67 A.

USB Type A QC3.0 output of 5 V 3 A, 9 V 2 A and 12 V 1.5 A.

Combined USB Type C and USB Type A output of 5 V 3 A, with a maximum total power of 15 W.

Compatible with PD3.0, QC2.0, QC3.0 and QC4.0.

Compatible with Huawei FCP.

Compatible with Samsung AFC.

Compatible with Apple 5 V 2.4 A.

Compatible with BC1.2 DCP 5 V 1.5 A.

Efficiency level VI.

Manufactured with flame retardant material.

Protection against overload and short circuit.

White color.

EAN 8436574709469.

The combination of USB Type C and USB Type A allows this charger to be used with devices and cables from different generations. The USB Type C port offers up to 20 W for devices compatible with fast charging, while USB Type A reaches up to 18 W through QC3.0. Both connectors can be used simultaneously with a maximum combined output of 15 W. GaN technology promotes greater efficiency and optimized thermal operation, while the intelligent chip automatically selects the compatible protocol. Its compact format is suitable for home, office, workshop or travel use and allows several conventional chargers to be replaced by a single versatile solution.

Installation advice

Use a USB cable suitable for the power required by the device.

To obtain up to 20 W connect the device to the USB Type C port.

To use QC3.0 connect the compatible device to the USB Type A port.

Check that the device and cable support the required protocol to take advantage of fast charging.

Keep the charger properly ventilated during operation.

Avoid covering the charger or using it in environments with high humidity.

Disconnect the charger from the mains before cleaning it.

Notice

The maximum power of 20 W corresponds to the USB Type C port when used individually. The USB Type A port can provide up to 18 W. When USB Type C and USB Type A are used simultaneously, the combined output is 5 V 3 A, with a maximum total power of 15 W. Final charging speed will depend on the protocol supported by the device and the cable used.

Technical table