Charger GaN 25W USB Type C PD3.0 QC4.0 USB Type A QC3.0 Black Aisens

Aisens ASCH-25W2P015-BK 25W GaN USB Type C PD3.0 QC4.0 USB Type A QC3.0 Black Charger

Aisens ASCH-25W2P015-BK GaN charger in black, designed for fast charging smartphones, tablets, cameras, consoles and other devices through USB Type C and USB Type A. It offers a maximum power of 25 W through the USB Type C port and supports Power Delivery PD3.0, QC4.0 and PPS. The USB Type A port reaches up to 18 W through QC3.0. Its GaN technology and integrated intelligent chip detect the compatible protocol and automatically adapt the power supply to provide efficient and stable charging.

Specifications

Maximum power of 25 W.

One USB Type C port.

One USB Type A port.

Input of 100 to 240 V, 50 to 60 Hz, 0.7 A.

USB Type C output of 5 V 3 A, 9 V 2.77 A and 12 V 2.08 A.

PPS from 3.3 to 5.9 V 3 A and from 3.3 to 11 V 2.25 A.

USB Type A QC3.0 output of 5 V 3 A, 9 V 2 A and 12 V 1.5 A.

Combined USB Type C and USB Type A output of 5 V 3.6 A.

Compatible with PD3.0, QC2.0, QC3.0, QC4.0, Huawei FCP, Samsung AFC, Apple 5 V 2.4 A and BC1.2 DCP.

Efficiency level VI.

Flame retardant material.

Protection against overload and short circuit.

Black color.

Complies with CE and RoHS regulations.

Charger functionally tested at 100 percent.

The combination of USB Type C and USB Type A allows the same charger to be used with devices and cables from different generations. The USB Type C port provides up to 25 W and supports PD3.0, QC4.0 and PPS, while the USB Type A port offers up to 18 W through QC3.0. Both connectors can also be used simultaneously with a combined output of 5 V 3.6 A. GaN technology improves efficiency and reduces heat generation compared with traditional designs, while the intelligent chip automatically selects the appropriate protocol. It is suitable for home, professional and travel use.

Installation advice

Use a USB cable suitable for the power required by the device.

To obtain up to 25 W connect the compatible device to the USB Type C port.

To take advantage of QC3.0 use the USB Type A port with a compatible device and cable.

Check that the device supports the required protocol to achieve fast charging.

Keep the charger in a ventilated area during operation.

Avoid covering it or using it in environments with high humidity.

Disconnect the charger from the mains before cleaning it.

Notice

The maximum power of 25 W corresponds to the USB Type C port when used individually. The USB Type A port can provide up to 18 W. When both ports are used simultaneously, the combined output is 5 V 3.6 A. Final charging power will depend on the charging protocol supported by the device and the characteristics of the cable used.

Technical table