Charger GaN 30W USB Type C PD3.0 QC4.0 Black Aisens

Aisens ASCH-30W1P019-BK 30W GaN USB Type C PD3.0 QC4.0 Black Charger

Aisens ASCH-30W1P019-BK GaN charger in black, designed to provide fast charging for smartphones, tablets, consoles, cameras, compatible laptops and other devices through USB Type C. It offers up to 30 W through Power Delivery PD3.0 and incorporates compatibility with PPS, QC2.0, QC3.0, QC4.0 and different fast charging protocols. Its GaN technology improves energy efficiency and reduces heat generation compared with conventional silicon chargers. The integrated intelligent chip identifies the protocol supported by the connected device and automatically adapts the power supply to achieve stable and efficient charging.

Specifications

Nominal power of 30 W.

One USB Type C port.

Input of 100 to 240 V, 50 to 60 Hz, 1.2 A.

USB Type C output of 5 V 3 A.

USB Type C output of 9 V 3 A.

USB Type C output of 12 V 2.5 A.

USB Type C output of 15 V 2 A.

USB Type C output of 20 V 1.5 A.

PPS from 3.3 V to 11 V and up to 3 A.

Compatible with Power Delivery PD3.0.

Compatible with QC2.0, QC3.0 and QC4.0.

Compatible with Huawei FCP and Huawei SCP.

Compatible with Samsung AFC.

Compatible with Apple 5 V 2.4 A.

Compatible with BC1.2 DCP 5 V 1.5 A.

Efficiency level VI.

Manufactured with flame retardant material.

Protection against overload and short circuit.

Black color.

GaN technology allows a high charging capacity to be concentrated in a compact format, improving efficiency and reducing thermal losses during operation. The USB Type C port supports several voltage profiles up to 30 W, allowing the charger to be used with devices from different categories and power requirements. Compatibility with PD3.0, PPS, QC4.0, Huawei FCP, Huawei SCP and Samsung AFC increases its versatility. The intelligent detection system automatically adapts the available profile, while overload and short circuit protections provide greater safety for home, professional or travel use.

Installation advice

Use a USB Type C cable suitable for the power required by the device.

To reach 30 W, the connected device must support a compatible charging profile.

Check that the cable used supports Power Delivery and the required current.

Keep the charger in a properly ventilated area.

Avoid covering the charger during operation.

Disconnect the charger from the mains before cleaning or handling it.

Notice

The actual charging power depends on the protocols supported by the connected device and the characteristics of the USB Type C cable used. Devices that are not compatible with PD3.0, PPS or the available fast charging protocols will automatically negotiate a lower power profile.

Technical table