Charger GaN 30W USB Type C PD3.0 QC4.0 White Aisens

Aisens ASCH-30W1P018-W 30W GaN USB Type C PD3.0 QC4.0 White Charger

Aisens ASCH-30W1P018-W GaN charger in white, designed to provide fast charging for smartphones, tablets, cameras, consoles, compatible laptops and other devices through USB Type C. It offers up to 30 W of power through Power Delivery PD3.0 and incorporates compatibility with PPS, QC2.0, QC3.0 and QC4.0. Its GaN technology improves energy efficiency and reduces heat generation compared with conventional silicon chargers. The integrated intelligent chip identifies the protocol supported by the connected device and automatically adapts the power parameters to achieve fast, stable and efficient charging.

Specifications

USB Type C charging power up to 30 W.

One USB Type C port.

Input of 100 to 240 V, 50 to 60 Hz, 1.2 A.

USB Type C output of 5 V 3 A.

USB Type C output of 9 V 3 A.

USB Type C output of 12 V 2.5 A.

USB Type C output of 15 V 2 A.

USB Type C output of 20 V 1.5 A.

PPS from 3.3 V to 11 V up to 3 A.

Compatible with Power Delivery PD3.0.

Compatible with QC2.0, QC3.0 and QC4.0.

Compatible with Huawei FCP and Huawei SCP.

Compatible with Samsung AFC.

Compatible with Apple 5 V 2.4 A.

Compatible with BC1.2 DCP 5 V 1.5 A.

Efficiency level VI.

Manufactured with flame retardant material.

Protection against overload and short circuit.

White color.

GaN technology allows a high charging capacity to be concentrated in a compact format, improving efficiency and reducing thermal losses during operation. Its different voltage profiles allow the power supply to be adapted to devices with different energy requirements. Compatibility with PD3.0, PPS, QC4.0, Huawei FCP, Huawei SCP and Samsung AFC expands the possibilities of use with equipment from different manufacturers. The intelligent system automatically selects the appropriate protocol, while overload and short circuit protections help maintain a safe power supply. A practical solution for home, professional, office or travel use.

Installation advice

Use a USB Type C cable suitable for the power required by the device.

To reach 30 W, the connected device must support a compatible charging profile.

Check that the cable supports Power Delivery and the required current.

Keep the charger in a properly ventilated area.

Avoid covering the charger during operation.

Disconnect the charger from the mains before cleaning or handling it.

Notice

The actual charging power depends on the protocol supported by the connected device and the characteristics of the USB Type C cable used. PPS mode supports a range from 3.3 V to 11 V and up to 3 A. Devices that are not compatible with the available fast charging protocols will automatically negotiate a lower compatible profile.

Technical table