Charger GaN 35W USB Type C PD3.0 QC4.0 White Aisens

Aisens ASCH-35W1P016-W 35W GaN USB Type C PD3.0 QC4.0 White Charger

Aisens ASCH-35W1P016-W GaN charger in white, designed to provide fast charging through a USB Type C port for smartphones, tablets, cameras, consoles, GPS devices and compatible laptops. It offers a maximum power of 35 W and supports Power Delivery PD3.0, PPS and different Quick Charge protocols. GaN technology improves energy efficiency and helps reduce heat generation and size compared with conventional silicon chargers. It incorporates an intelligent chip that identifies the compatible protocol of the connected device and automatically adapts the charging parameters.

Specifications

Maximum power of 35 W.

One USB Type C port.

Input of 100 to 240 V, 50 to 60 Hz, 1.0 A.

USB Type C output of 5 V 3 A.

USB Type C output of 9 V 3 A.

USB Type C output of 12 V 2.92 A.

USB Type C output of 15 V 2.33 A.

USB Type C output of 20 V 1.75 A.

PPS from 3.3 to 11 V up to 3 A.

Compatible with Power Delivery PD3.0.

Compatible with QC2.0, QC3.0 and QC4.0.

Compatible with Huawei FCP and Huawei SCP.

Compatible with Samsung AFC.

Compatible with Apple 5 V 2.4 A.

Compatible with BC1.2 DCP 5 V 1.5 A.

Efficiency level VI.

Manufactured with flame retardant material.

Protection against overload and short circuit.

Dimensions of 32 x 40 x 35 mm.

White color.

Part number ASCH-35W1P016-W.

EAN 8436574709520.

The 35 W power provides greater charging capacity than lower power adapters, allowing operation with a wide variety of USB Type C devices. The 5 V, 9 V, 12 V, 15 V and 20 V profiles facilitate automatic negotiation of the appropriate voltage according to the connected equipment. Support for PD3.0, PPS, QC4.0, Huawei FCP, Huawei SCP and Samsung AFC expands compatibility with different manufacturers. Its compact format is suitable for home, office or travel, while the flame retardant material and overload and short circuit protections help maintain stable and safe operation.

Installation advice

Use a USB Type C cable suitable for the power required by the device.

To reach up to 35 W, both the device and cable must support the corresponding charging profile.

Check that the cable used supports Power Delivery and the required current.

Keep the charger in a properly ventilated area during operation.

Avoid covering it or placing it near heat sources.

Disconnect the charger from the mains before cleaning or handling it.

Notice

The maximum power of 35 W depends on the protocol supported by the connected device. Equipment that is not compatible with PD3.0, PPS or the available fast charging protocols will automatically negotiate a lower profile. Final charging speed also depends on the characteristics and capacity of the USB Type C cable used.

Technical table