Charging board by Doogee E3 Max premium quality

Charging Board for Doogee E3 Max Premium Quality

Professional replacement part designed to replace the charging board of the Doogee E3 Max and restore the connection of the device power system. This part is suitable when the installed module has intermittent charging, no connection, port damage, damaged contacts or failures caused by moisture, impacts or continued wear. Its premium quality manufacturing provides defined connectors, firm contact points and precise adaptation to the internal housing. It is intended for professional installation and must be compared with the removed board before final assembly.

Premium quality guarantees a stable electrical connection and suitable tolerances to facilitate assembly inside the Doogee E3 Max. This board allows faults located in the charging module to be repaired without replacing other components that operate correctly. Its design promotes secure contact with the associated internal flex cables and elements, helping to reduce disconnections and intermittent failures after repair. Before installation, the port, connectors, mounting points and component layout must be checked. Available for immediate dispatch from Spain.

Installation Advice

Switch off the device completely and disconnect the battery.

Use ESD protection throughout the repair.

Compare the port, connectors and mounting points with the removed board.

Align the flex cables and connectors without applying lateral pressure.

Check the condition of the coaxial cables and associated components.

Test charging and connection before closing the chassis.

Replace the adhesives and clean any residue before final assembly.

Technical Table