Display by Asus Vivobook 16X F1605PA premium quality

LCD IPS Screen for Asus Vivobook 16X F1605PA 16 Inch WUXGA 30 Pin Premium Quality

Replacement screen for Asus Vivobook 16X F1605PA, designed to replace the panel when it has cracks, lines, flickering, stains, no image or backlight failures. This premium replacement maintains the same LCD IPS-level panel type used in the WUXGA configuration of the laptop, with a 16-inch diagonal, 1920 x 1200 pixel resolution and 16:10 format. It works through a 30-pin eDP interface and offers a 60 Hz refresh rate, anti-glare surface and LED backlight. The official F1605PA configuration also specifies 300 nits brightness and 45 percent NTSC coverage.

Key features

LCD IPS-level screen with LED backlight.

16-inch diagonal.

WUXGA resolution of 1920 x 1200 pixels.

16:10 widescreen format.

60 Hz refresh rate.

30-pin eDP connector located in the lower right area.

0.5 mm connector pitch.

Matte anti-glare finish.

Non-touch screen.

Premium quality with the same type of panel technology fitted to the LCD version of the laptop.

Compatible with Asus Vivobook 16X F1605PA in 30-pin WUXGA configurations. There are also X1605PA family configurations with a 16-inch WUXGA, IPS and 30-pin eDP screen, so comparing the removed panel before installation is recommended.

Advantages and quality

Premium quality is aimed at repairs where the main characteristics of the factory-fitted screen assembly in the LCD WUXGA version need to be maintained. The IPS-level panel provides good viewing angles, stable image and a 1920 x 1200 resolution that maintains the pixel density and working area intended for this laptop. Its 16:10 aspect ratio makes viewing documents, applications and vertical content easier, while the anti-glare finish reduces reflections in illuminated environments. The 30-pin eDP connector allows direct integration provided that the resolution, connector position and physical characteristics match those of the replaced panel. A replacement particularly suitable for workshops and technical services looking for a reliable repair and correct fit.

Installation tips

Completely disconnect the laptop and the internal battery before handling the screen connector.

Check that the removed panel is 16 inches, 1920 x 1200 resolution and uses a 30-pin eDP connection.

Verify the connector position and mounting points before final installation.

Do not connect or disconnect the eDP cable while the battery is connected.

Perform an image, brightness, colour and backlight test before fully securing the bezel.

Avoid applying direct pressure to the LCD surface during installation.

Technical table