Display by Hotwav Hyper 7S 5G with black touch screen premium quality

Screen for Hotwav Hyper 7S 5G with black touch panel premium quality

Complete screen with black touch panel for Hotwav Hyper 7S 5G, technical model Hyper 7S, in premium quality, designed to replace a broken display, a screen with no image, lines, stains or touch response problems. This replacement integrates the screen and touch digitizer into a single assembly prepared for installation on the existing structure of the device. The Hotwav Hyper 7S 5G features a 6.6-inch IPS Incell screen with HD Plus resolution of 720 x 1612 pixels and a refresh rate of up to 120 Hz. Intended for professional installation and complete testing before final closure.

Specifications

Complete screen with black touch digitizer.

Compatible with Hotwav Hyper 7S 5G.

Technical model Hyper 7S.

Device screen size of 6.6 inches.

Resolution of 720 x 1612 pixels.

IPS Incell technology.

Maximum device refresh rate of 120 Hz.

Premium quality.

Premium quality is intended for professional repairs where the aim is to restore good sharpness, uniform brightness, balanced color reproduction and stable touch response. Its construction facilitates precise fitting on the existing frame and allows both the panel and digitizer to be replaced simultaneously when there is image damage or touch malfunction. IPS Incell technology provides good viewing angles and compact integration of the assembly. The fingerprint reader on the Hotwav Hyper 7S 5G is located on the side and is not part of the screen. Designed to reduce repeat repairs and optimize repair times.

Installation tips

Disconnect the battery and use ESD protection.

Perform a cold test before removing protections or adhesives.

Check image, brightness and touch response across the entire surface.

Align the connector without forcing the flex cable.

Check the operation of the proximity sensor before closure.

Check the side fingerprint reader after installation.

Completely clean the frame and remove previous adhesive residue.

Complete the final closure only after checking all functions.

Notice

Check the operation of the proximity sensor and all elements associated with the front section before final installation. The fingerprint reader on the Hotwav Hyper 7S 5G is located on the side of the device and is not integrated into the screen.

Technical table