Display by Lenovo Tab P11 Pro TB-J706F with black touch screen premium quality

Screen for Lenovo Tab P11 Pro TB-J706F TB-J706L with black touch premium quality

Complete screen with touch in black color for Lenovo Tab P11 Pro TB-J706F and TB-J706L in premium quality, designed to replace the damaged module of the device and restore display, touch response and normal tablet use. This spare part is compatible with the WiFi and LTE versions of the first generation Lenovo Tab P11 Pro, maintaining the 11.5-inch format and 2K resolution of the original device model. It is a solution aimed at professional repair when the screen has broken glass, image loss, lines, stains, areas without touch response or faults caused by impacts. It is always recommended to check the technical model of the device before installation, especially to avoid confusing it with the Lenovo Tab P11 Pro 2nd Gen TB132FU, which uses a different screen assembly.

Key features

Complete screen with integrated touch.

Black color.

Compatible with Lenovo Tab P11 Pro TB-J706F.

Compatible with Lenovo Tab P11 Pro TB-J706L.

Not compatible with Lenovo Tab P11 Pro 2nd Gen TB132FU.

11.5-inch OLED panel.

2560 x 1600 pixel resolution.

Suitable spare part to replace Lenovo Tab P11 Pro screen.

Premium quality allows a stable visual experience to be restored, with good sharpness, correct contrast, precise touch response and suitable fit for professional repair. In this type of screen, it is important to perform a cold test before final assembly to verify image, touch, brightness and absence of lines or dead areas. This assembly is designed for workshops that need a reliable spare part for Lenovo Tab P11 Pro TB-J706F and TB-J706L, avoiding incompatibilities with later generations or variants with a different panel size. Its installation allows the useful life of the tablet to be extended and common display faults to be solved without replacing the motherboard or other internal modules. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling the screen module.

Always perform a cold test before removing adhesives or closing the tablet.

Check image, brightness, touch response and pressure areas.

Do not force the flex cable or connectors during assembly.

Completely clean adhesive residue from the frame before sealing.

Use suitable adhesive for tablet screen.

Apply uniform pressure after sealing and avoid tension on the corners.

Verify the technical model TB-J706F or TB-J706L before installation.

Technical table