Display by Oukitel WP500 5G with black touch screen premium quality

Screen for Oukitel WP500 5G with black touch panel premium quality

Complete screen with black touch panel for Oukitel WP500 5G, technical model WP500, in premium quality, designed to replace a broken display, a screen with no image, lines, stains or touch response problems. This replacement integrates the screen and touch digitizer into a single assembly prepared for installation on the existing structure of the device. The Oukitel WP500 5G features a 6.8-inch screen with FHD Plus resolution of 1080 x 2460 pixels and a refresh rate of up to 120 Hz. Intended for professional installation and complete testing before final closure.

Specifications

Complete screen with black touch digitizer.

Compatible with Oukitel WP500 5G.

Technical model WP500.

Device screen size of 6.8 inches.

Device resolution of 1080 x 2460 pixels.

Maximum device refresh rate of 120 Hz.

Black color.

Premium quality.

Premium quality is intended for professional repairs where good sharpness, uniform brightness, balanced color reproduction and stable touch response are required. Its construction facilitates precise fitting on the existing frame and allows both the panel and digitizer to be replaced simultaneously when there is image damage or touch malfunction. The fingerprint reader on the Oukitel WP500 5G is located on the side of the device, so it is not part of the screen assembly. Before final installation, it is recommended to especially check the proximity sensor, the entire touch surface and correct display performance to reduce possible repeat repairs.

Installation tips

Disconnect the battery and use ESD protection.

Perform a cold test before removing protections or adhesives.

Check image, brightness and touch response across the entire surface.

Align the connector without forcing the flex cable.

Check the operation of the proximity sensor before closure.

Check the side fingerprint reader after installation.

Completely clean the frame and remove previous adhesive residue.

Complete the final closure only after checking all functions.

Notice

The fingerprint reader on the Oukitel WP500 5G is located on the side and is not integrated into the screen. Especially check the operation of the proximity sensor, image and touch response before final installation.

Technical table