Display by Samsung Galaxy Z Flip 5 5G SM-F731B GH82-31828E with black touch screen with grey frame Service Pack

Screen for Samsung Galaxy Z Flip 5 5G SM-F731B GH82-31828E with black touch and gray frame Service Pack (SM-F731B)

Complete display module with touch for Samsung Galaxy Z Flip 5 5G, technical model SM-F731B, part number GH82-31828E, supplied as Service Pack with integrated gray frame. This assembly features a foldable Dynamic AMOLED 2X panel, specifically designed for the Flip 5 hinge system, delivering accurate colors, uniform brightness, and smooth transitions thanks to its adaptive refresh rate of up to 120 Hz. It is intended to fully restore device functionality after flexible panel damage, image issues, or touch failures related to the folding mechanism.

As a complete module with frame, it ensures precise panel alignment, correct flex routing, and structural stability during installation. Service Pack quality guarantees full hardware compatibility, providing stable behavior in both active use and standby. This spare part is intended for professional repair environments, recommended for workshops seeking reliability, accurate assembly, and reduced post-repair issues. Available for immediate shipping from Spain.

Display specifications

Technology: Foldable Dynamic AMOLED 2X
Refresh rate: up to 120 Hz adaptive
Resolution: Full HD+
Touch response: high precision and low latency

Installation tips

Disconnect the battery before starting the replacement.
Always test the module before final assembly.
Ensure correct routing of the display flex without twisting or tension.
Check frame alignment and uniform folding before sealing the device.
Verify correct screen behavior when opening and closing the phone.

Very important:
After replacing the screen on the Galaxy Z Flip 5, magnetic open and close system recalibration is mandatory. This process must be performed using the official Samsung Self Repair Assistant software, with the device updated to the latest available Android firmware. Failure to perform this calibration may cause flickering, screen shutdowns, incorrect wake behavior, or erratic operation that does not indicate a defective screen.

Important about returns:
Returns will not be accepted for screens that have been installed or handled and show issues related to the magnetic opening and closing system caused by missing or incorrect calibration. These behaviors are not considered a screen defect but an incomplete installation procedure.

Notice

Service Pack screens are supplied with the latest firmware preinstalled. To ensure proper image, touch, and sensor performance, the device must be updated to the latest Android version before and after installation.

Technical table