Display by Samsung Galaxy Z Flip 6 5G SM-F741 black touch screen blue assembly frame GH82-35014C Service Pack

Screen for Samsung Galaxy Z Flip 6 5G SM-F741B GH82-35014C with black touch and blue assembled frame Service Pack (SM-F741B)

Complete display module with touch for Samsung Galaxy Z Flip 6 5G, technical model SM-F741B, part number GH82-35014C, supplied as Service Pack with integrated blue assembled frame. This assembly is designed to replace the original module in cases of flexible panel damage, image issues, touch failures, or problems related to the folding mechanism. As a pre-assembled screen with frame, it allows precise installation, correct flex routing, and stable open and close behavior, reducing installation time and minimizing post-repair issues.

Service Pack quality guarantees full compatibility with the Galaxy Z Flip 6 hardware, providing stable operation during both active use and standby. This spare part is intended for professional repair environments, recommended for workshops seeking reliability, accurate assembly, and reduced post-installation incidents. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before starting the replacement.
Always test the module before final assembly.
Ensure correct routing of the display flex without twisting or tension.
Check frame alignment and uniform folding before sealing the device.
Verify correct screen behavior when opening and closing the phone.

Very important:
On the Galaxy Z Flip 6, magnetic open and close system recalibration is mandatory after screen replacement. This process must be carried out using the official Samsung Self Repair Assistant software, with the device updated to the latest available Android firmware. Failure to perform this calibration may cause flickering, screen shutdowns, incorrect wake behavior, or erratic operation that does not indicate a defective screen.

Important about returns:
Returns will not be accepted for screens that have been installed or handled and show issues related to the magnetic opening and closing system caused by missing or incorrect calibration. These behaviors are not considered a screen defect but an incomplete installation procedure.

Notice

Service Pack screens are supplied with the latest firmware preinstalled. To ensure proper image, touch, and sensor performance, the device must be updated to the latest Android version before and after installation.

Technical table