Display by Samsung Galaxy Z Flip 7 5G F766 with black touch screen with blue frame GH82-37581A Service Pack

Screen for Samsung Galaxy Z Flip 7 5G F766B with black touch panel and blue frame GH82-37581A Service Pack

Complete foldable screen with touch panel for Samsung Galaxy Z Flip 7 5G, technical model SM-F766B, supplied with blue frame and Service Pack reference GH82-37581A. This assembly is designed to replace the inner screen when it has cracks, lines, spots, image loss, touch problems or structural damage caused by impacts or pressure on the panel. Reference GH82-37581A corresponds to the blue frame assembly for the Galaxy Z Flip 7 and is specifically intended for the SM-F766B variant.

As a Service Pack screen, it uses the same type of panel fitted to the device at the factory. The Galaxy Z Flip 7 uses a 6.9-inch foldable Dynamic AMOLED 2X main display with FHD Plus resolution of 2520 x 1080 pixels and a refresh rate of up to 120 Hz. The frame assembly simplifies the repair by keeping the flexible panel and main structural elements correctly positioned, reducing the risk of stress or misalignment during installation.

Service Pack quality is intended for professional repairs requiring maximum dimensional correspondence, touch stability and visual performance equivalent to the factory-fitted assembly. It restores the sharpness, colour reproduction, contrast and fluidity of the Dynamic AMOLED 2X panel while providing precise fitting of the foldable assembly inside the chassis. Reference GH82-37581A is identified for the blue finish and later equivalent references associated with the same assembly may exist depending on supply revision.

Available for professional installation in repair workshops.

Installation advice

Completely disconnect the battery before handling the screen assembly.

Perform a complete image and touch function test before final closure.

Handle the foldable panel only by the designated structural areas and avoid applying direct pressure to the flexible surface.

Carefully check the position of the flex cables and connectors before folding the device.

Replace the necessary adhesives and completely remove residues from the previous installation.

Check image, touch response, folding, sensors and general operation before final sealing.

Warning

Service Pack screens come with the latest Firmware loaded from the factory, so to avoid possible image and touch failures, it is recommended to have the device updated to the latest available Android version.

Technical table