Display by Teclast P30T with black touch screen premium quality

LCD Screen for Teclast P30T with Black Touch Digitizer Premium Quality

Complete screen for Teclast P30T, technical model P30T, consisting of an LCD panel and black touch digitizer in Premium quality. This replacement part is designed to restore display and touch response when the tablet has cracks, areas without image, lighting problems or sensitivity failures. The device uses a 10.1 inch display with 1280 x 800 resolution and IPS technology. The assembly is intended for professional repair and must be fully tested before permanently closing the device.

Specifications

Complete LCD screen with black touch digitizer.

10.1 inch screen diagonal.

1280 x 800 pixel resolution.

IPS panel technology.

Compatible with Teclast P30T.

Premium quality.

Premium quality provides a high end solution designed to maintain stable display performance, good definition, image uniformity and precise touch response. The assembly allows the display panel and touch glass to be replaced at the same time, facilitating a complete repair when both elements are damaged. Its construction is designed to provide suitable mounting tolerances, stable connection and clean assembly. Before permanently installing the screen, it is especially important to compare the flex cable and the physical position of the LCD connector with the part removed from the device, as there are manufacturing variants of this model. Available for immediate shipping from Spain.

Installation Tips

Disconnect the battery before handling the screen.

Use ESD protection during the repair.

Physically compare the new screen with the removed screen before connecting it.

Pay particular attention to the position, orientation and routing of the LCD flex cable.

Align the connectors correctly and do not force the flex cable during connection.

Perform a cold test checking image and touch operation before removing protective films or adhesives.

Completely clean any remains of the previous adhesive before final assembly.

Check the entire touch surface and image stability before closing the tablet.

Notice

Before installation, it is essential to physically check the position of the LCD connection connector and compare it with the screen originally fitted to the tablet. There are different versions of the Teclast P30T in which the position of the LCD connector may vary. The screen must not be installed and no protective film or adhesive should be removed until confirming that the location and orientation of the connector exactly match the screen removed from the device.

Technical Table