Display Hard Oled SP by iPhone 13 A2482 A2631 A2633 A2634 A2635 with black touch screen No IOS warning

The SP Hard OLED screen for Apple iPhone 13, models A2482, A2631, A2633, A2634 and A2635, is a black compatible replacement part that integrates a rigid OLED panel and touch digitizer. This version is commercially marketed as a no iOS warning version and is designed to replace screens with broken glass, image defects, lines, spots or touch response problems. Its self-emissive pixel technology provides deep blacks and high contrast while maintaining the device's OLED display technology. It is an alternative for replacing the iPhone 13 screen in professional repairs and refurbishment operations.

- Compatible brand:Apple.

- Model:iPhone 13.

- Compatible technical models:A2482, A2631, A2633, A2634 and A2635.

- Screen technology:Hard OLED (rigid OLED).

- Size:6.1 inches.

- Panel structure:OLED with rigid substrate.

- Touch digitizer:integrated into the screen module.

- Color:black.

- Display:self-emissive pixels with deep blacks and high contrast.

- Function:image reproduction and touch response.

- Version:commercially marketed as a no iOS warning version.

- Component type:replacement OLED screen with touch digitizer.

- Quality:compatible SP Hard OLED.

The SP Hard OLED screen allows the iPhone 13 display assembly to be replaced using a single module that integrates the OLED panel and touch digitizer, simplifying repair operations. Its self-emissive pixel technology provides deep blacks and high contrast without requiring LCD backlighting. Compared with Incell alternatives, it maintains OLED display technology, while its rigid construction represents a replacement option at a reasonable cost compared with Soft OLED screens. The black front finish is designed to integrate into the device, and its configuration corresponds to the five identified technical variants. The commercial no iOS warning designation distinguishes this version within the SP range. It is a replacement part intended for workshops seeking to balance image quality, touch functionality and replacement cost.

- Switch off the iPhone 13 and disconnect the battery before handling the screen connectors, using ESD antistatic protection.

- Carefully remove the damaged screen and disconnect its flex cables using appropriate tools.

- Carefully transfer the upper sensor assembly from the previous screen, preserving the components linked to the Face ID system.

- Align the SP Hard OLED screen connectors without applying excessive pressure or bending the flex cables.

- Temporarily connect the module and check the image, brightness, colors and touch response across the entire surface before final closure.

- Verify the operation of the proximity sensor and Face ID system after installation.

- Check the recognition of the installed screen and the Parts and Service History in iOS settings.

- Clean any adhesive residue from the housing and apply suitable new perimeter adhesive.

- Close the screen by applying uniform pressure around the perimeter to ensure proper attachment.