Display JK by iPhone 15 Plus A3094 A2847 A3093 A3096 with black touch screen JK-YU0670-F6B Soft Oled quality

JK Soft OLED Screen for iPhone 15 Plus A3094 A2847 A3093 A3096 with Black Touchscreen JK-YU0670-F6B

Complete screen module with touchscreen for Apple iPhone 15 Plus A3094, A2847, A3093 and A3096 in JK Soft OLED quality, designed to restore the display and touch response of the device. It incorporates a flexible 6.7 inch OLED panel with 2796 x 1290 pixel resolution and black front finish. Soft OLED technology uses a flexible substrate that allows a thinner construction and better adaptation to the device design than Hard OLED alternatives. JK reference JK-YU0670-F6B, aimed at professional repair and cold testing before closing.

Specifications

Complete screen with integrated touch digitizer.

Flexible Soft OLED technology.

6.7 inch size.

2796 x 1290 pixel resolution.

Specified brightness of 750 plus minus 50 cd per square meter.

100000 to 1 contrast.

103 percent NTSC coverage.

Black front color.

JK manufacturing.

Compatible with iPhone 15 Plus A3094, A2847, A3093 and A3096.

Part No JK-YU0670-F6B.

JK Soft OLED quality offers deep blacks, high contrast, good brightness uniformity and suitable color reproduction for high end repairs. Its flexible substrate reduces stress on the panel during installation and provides a structure closer to the OLED technology used from the factory in the iPhone 15 Plus than a rigid Hard OLED solution. Touch response remains stable and precise, while its wide viewing angles provide a uniform visual experience. It is aimed at repair shops looking for a high end compatible alternative with a good balance between visual quality, durability and repair cost. Available for immediate shipping from Spain.

Installation Tips

Disconnect the battery before handling the screen connectors.

Use ESD protection throughout the repair.

Perform a cold test before removing protectors or adhesives.

Correctly align the connectors and avoid forcing the flex cables.

Check image, touch response, brightness, Face ID and sensors before closing.

Avoid applying localized pressure to the OLED panel.

Replace the perimeter adhesive and completely remove previous residue.

Notice

Always perform a complete test before final installation. Check image, touch response, Face ID, proximity sensor and automatic brightness before removing protectors or applying the closing adhesive. Components associated with the front system must be handled carefully during transfer to prevent loss of functionality.

Technical Table