Display lcd by Oneplus 9 with black touch screen with grey frame compatible version international

TFT screen for OnePlus 9 (LE2113) + black touch with gray frame compatible international version

Complete TFT screen with touch digitizer and gray frame for OnePlus 9, intended for replacements where a functional and stable spare part is required in terms of image and touch response. Designed for direct chassis installation and to restore the device operation when the original screen has breakage, lines, no image, erratic touch or non-responsive areas. This version with frame facilitates alignment, helps maintain assembly tolerances and reduces the risk of stress on the panel during final closing. Format and connections prepared for the international version of OnePlus 9, with usual compatibility in codes LE2113, LE2115 and LE2117 depending on the market. Recommended for professional installation with cold test before final sealing.

Key features
• Panel type: TFT (compatible)
• Size and resolution: 6.55" · 1080x2400
• Color: black · gray frame
• Set: screen + touch + frame
• Compatibility: OnePlus 9 international version (LE2113, LE2115, LE2117)
• Part number (Part No): —

Compatible TFT quality is aimed at economical repairs and at restoring correct daily use on devices with prior damage. It allows recovering the display and consistent touch for navigation, calls and apps, maintaining a reasonable fit with the included frame. In workshop environments, it is a practical solution when cost is prioritized over higher panel technologies, always performing prior tests of brightness, touch areas and flex stability. To reduce repeat issues, it is advisable to check the phone frame for deformations, clean adhesive residue and replace gasket or adhesives if applicable. Available for immediate shipping from Spain.

Installation tips

1. Disconnect the battery and use ESD protection before handling connectors.

2. Place the screen and perform a cold test of image and touch before closing the chassis.

3. Align connectors without forcing the flex and verify they are fully seated.

4. Clean residue and replace adhesives for an even seal.

5. Check basic functions after assembly: brightness, touch areas, earpiece speaker and sensors.

Notice
On TFT screens, the in-display fingerprint sensor and the proximity sensor do not work.
As they are thicker, TFT screens may sit slightly higher than the frame compared to compatible OLED and premium qualities.

Technical table