Display lcd by Xiaomi Redmi Note 14 4G with black touch screen compatible TFT

Compatible TFT screen for Xiaomi Redmi Note 14 4G with black touch (2312DRA50G 2312DRA50I)

Complete screen module with touch for Xiaomi Redmi Note 14 4G (technical models 2312DRA50G and 2312DRA50I) in compatible TFT quality, designed to restore the basic functionality of the device after glass breakage, lack of image, or touch response failures. It is supplied in black color and is intended for economical repairs where recovery of daily use with a controlled cost is prioritized. This replacement is intended for workshop environments, with verified compatibility for the 4G version and a recommendation for cold testing before final closure to ensure correct image, touch response, and proper module seating.

Key features
• Complete screen plus touch for Xiaomi Redmi Note 14 4G
• Compatible TFT technology oriented to economical repair
• Black color
• Specific fit for the 4G version
• Designed for technical models 2312DRA50G and 2312DRA50I
• Prepared for cold testing and verification before closure

Compatible TFT quality allows restoring the basic operation of the device with a reduced investment. Compared to compatible OLED and premium qualities, TFT screens present clear technical differences, such as lower brightness, contrast, and viewing angles. In addition, the TFT module is thicker, so it may sit slightly more raised compared to the device frame once installed. These characteristics are inherent to this technology and do not constitute a product defect. For a stable result, it is recommended to check image uniformity, touch zones, and correct module seating before final closure. Available for immediate dispatch from Spain.

Installation tips

1. Disconnect the battery and use ESD protection before starting the replacement.

2. Present the screen and perform a complete cold test before closing the chassis.

3. Align the connectors without forcing and verify that they are not folded or under tension.

4. Replace adhesives, clean residues, and ensure uniform sealing.

5. Check touch response by zones, brightness, and correct module seating.

6. Apply uniform pressure between 20 and 30 minutes after sealing to stabilize the assembly.

Notice
In compatible TFT quality, the fingerprint sensor and the proximity sensor do not work.
TFT screens are thicker and may sit slightly more raised than compatible OLED and premium qualities.
Compatible screen designed exclusively for Xiaomi Redmi Note 14 4G. Not compatible with the 5G version.

Technical table